Microchip RN1810-I/RM100 3.15 to 3.45V WiFi Module, 802.11b, 802.11g, 802.11n UART
Documentos Técnicos
Especificações
Brand
MicrochipSupported Protocol
802.11b, 802.11g, 802.11n
Supported Security Standards
WPS
Supported Bus Interfaces
UART
Supply Voltage
3.15 to 3.45V
Dimensions
17.8 x 26.7 x 2.2mm
Height
2.2mm
Length
26.7mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
17.8mm
País de Origem
Thailand
Detalhes do produto
RN1810/RN1810E 802.11b/g/n WiFi Module
The Microchip RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary components into a surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier.
The RN1810 can help shorten development time. The integrated design provides a certified solution to remove the need for RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections.
Two variants are available; the RN1810 with an integral PCB Trace Antenna and the RN1810E with a W.FL Connector for an External Antenna.
WLAN (Wireless Local Area Network) - Microchip Technology
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
50
P.O.A.
50
Documentos Técnicos
Especificações
Brand
MicrochipSupported Protocol
802.11b, 802.11g, 802.11n
Supported Security Standards
WPS
Supported Bus Interfaces
UART
Supply Voltage
3.15 to 3.45V
Dimensions
17.8 x 26.7 x 2.2mm
Height
2.2mm
Length
26.7mm
Maximum Operating Temperature
+85 °C
Minimum Operating Temperature
-40 °C
Width
17.8mm
País de Origem
Thailand
Detalhes do produto
RN1810/RN1810E 802.11b/g/n WiFi Module
The Microchip RN1810 is a low-power 2.4 GHz 802.11b/g/n WiFi Module that combines all the necessary components into a surface mount solution. The RN1810 integrates a TCP/IP networking stack, cryptographic accelerator, power management subsystem, real-time clock, 2.4 GHz transceiver and RF power amplifier.
The RN1810 can help shorten development time. The integrated design provides a certified solution to remove the need for RF design regulatory and compliance testing. Also the RN1810 is simple to program as only simple ASCII command language is required. The simplest configuration of the RN1810 requires only power, ground and UART Tx and Rx connections.
Two variants are available; the RN1810 with an integral PCB Trace Antenna and the RN1810E with a W.FL Connector for an External Antenna.