NSK BSN3062DDUHP2B R BE4L5 2 Row Ball Screw Support Bearing - 30 mm ID, 62 mm OD 28 mm Race Width
Documentos Técnicos
Especificações
Brand
NSKProduct Type
Ball Screw Support Bearing
Inside Diameter
30 mm
Outside Diameter
62 mm
Race Width
28mm
Cage Material
Steel
Ball Material
Steel
Number of Rows
2
Static Load Rating
55.5kN
Dynamic Load Rating
28.6kN
Bore Type
Parallel
Race Type
Plain
País de Origem
United Kingdom
Detalhes do produto
Ball Screw Support Bearings - BSN Series
The BSN series of ball screw support bearings are double row, angular contact thrust ball bearings, with a 60° contact angle. They are equivalent to two single row bearings in a back-to-back arrangement, with a single outer ring. Bearings are supplied ready to be mounted. They come greased with long life lithium soap grease, with synthetic hydrocarbon base oil. Under normal operating conditions, the bearings are greased for life. A relubrication groove on the outside surface of the outer ring allows the bearings to be relubricated during operation if necessary. The bearings are sealed on both sides. The low friction contact lip seal runs in a grove in the inner ring giving excellent sealing characteristics, while minimising torque and heat generation. Preload is set during manufacture so that the correct loading is achieved when the lock nut is tightened to the recommended torque.
Ball Screw Support Bearings
R$ 5.990,92
R$ 5.990,92 Each (Sem VAT)
1
R$ 5.990,92
R$ 5.990,92 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
Informações de estoque temporariamente indisponíveis.
Documentos Técnicos
Especificações
Brand
NSKProduct Type
Ball Screw Support Bearing
Inside Diameter
30 mm
Outside Diameter
62 mm
Race Width
28mm
Cage Material
Steel
Ball Material
Steel
Number of Rows
2
Static Load Rating
55.5kN
Dynamic Load Rating
28.6kN
Bore Type
Parallel
Race Type
Plain
País de Origem
United Kingdom
Detalhes do produto
Ball Screw Support Bearings - BSN Series
The BSN series of ball screw support bearings are double row, angular contact thrust ball bearings, with a 60° contact angle. They are equivalent to two single row bearings in a back-to-back arrangement, with a single outer ring. Bearings are supplied ready to be mounted. They come greased with long life lithium soap grease, with synthetic hydrocarbon base oil. Under normal operating conditions, the bearings are greased for life. A relubrication groove on the outside surface of the outer ring allows the bearings to be relubricated during operation if necessary. The bearings are sealed on both sides. The low friction contact lip seal runs in a grove in the inner ring giving excellent sealing characteristics, while minimising torque and heat generation. Preload is set during manufacture so that the correct loading is achieved when the lock nut is tightened to the recommended torque.