Nuvotem Talema 230V ac, 2 x 9V ac Toroidal Transformer, 50VA 2 Output
Documentos Técnicos
Especificações
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 9V ac
Power Rating
50VA
Number of Outputs
2
Secondary Current
2.78A
Height
33mm
Weight
650g
Diameter
80mm
Dimensions
80 (Dia.) x 33mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Minimum Temperature
0°C
Detalhes do produto
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 1.023,64
Each (Sem VAT)
1
R$ 1.023,64
Each (Sem VAT)
1
Comprar em grandes quantidades
| Quantidade | Preço unitário |
|---|---|
| 1 - 9 | R$ 1.023,64 |
| 10 - 24 | R$ 982,24 |
| 25 - 49 | R$ 891,49 |
| 50 - 74 | R$ 797,82 |
| 75+ | R$ 700,74 |
Documentos Técnicos
Especificações
Brand
Nuvotem TalemaPrimary Voltage Rating
230V ac
Secondary Voltage Rating
2 x 9V ac
Power Rating
50VA
Number of Outputs
2
Secondary Current
2.78A
Height
33mm
Weight
650g
Diameter
80mm
Dimensions
80 (Dia.) x 33mm
Maximum Operating Frequency
450Hz
Termination Type
Copper Conductor Termination Wire
Isolation Voltage
4.5kV ac
Maximum Temperature
+120°C
Minimum Temperature
0°C
Detalhes do produto
Open Style with Leads, 15VA to 1000VA
High-quality open style toroidal transformers with a single 230 Vac 50/60 Hz primary winding. Twin secondary windings may be connected in series or parallel or used independently.
Supplied with
Full mounting kit
Warning
Under no circumstances should both ends of the fixing bolt simultaneously contact the metal chassis or framework as this would create a potentially dangerous 'shorted-turn'.
Standards
UL 506; EN 61558