Documentos Técnicos
Especificações
Brand
onsemiMounting Type
Surface Mount
Package Type
QFN
Power Supply Type
Single
Number of Channels per Chip
2
Pin Count
20
Typical Single Supply Voltage
6 → 12 V
Typical Gain Bandwidth Product
80MHz
Maximum Operating Temperature
+125 °C
Minimum Operating Temperature
-40 °C
Rail to Rail
No
Length
4mm
Height
0.95mm
Width
4mm
Dimensions
4 x 4 x 0.95mm
Detalhes do produto
NCS5651MNTXG Dual Operational Amplifier, ON Semiconductor
The NCS5651 is a high efficiency, class A/B, low distortion power line driver. It is optimised to accept a signal from a Power Line Carrier modem. It incorporates two Operational Amplifiers (op-amps). The output op-amp is designed to drive up to 2 A peak. At the output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail, giving the user improved SNR. In addition to the output amplifier, the small-signal provided op-amp can be configured as a unity gain follower buffer or it can provide a stage of a 4-pole low pass filter.
The NCS5651 offers a current limit programmable with a single resistor. The device provides also two independent thermal flags with hysteresis. The thermal warning flag shows when the internal junction temperature has reached a user programmable thermal warning threshold. The thermal error flag indicates that the internal junction temperature has exceeded 150°C.
Typical applications are Power Line Communication (PLC) applications, actuators and motors drivers and any applications where a robust power amplifier is required
Operational Amplifiers, ON Semiconductor
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
Embalagem de Produção (Bobina)
2
P.O.A.
Embalagem de Produção (Bobina)
2
Documentos Técnicos
Especificações
Brand
onsemiMounting Type
Surface Mount
Package Type
QFN
Power Supply Type
Single
Number of Channels per Chip
2
Pin Count
20
Typical Single Supply Voltage
6 → 12 V
Typical Gain Bandwidth Product
80MHz
Maximum Operating Temperature
+125 °C
Minimum Operating Temperature
-40 °C
Rail to Rail
No
Length
4mm
Height
0.95mm
Width
4mm
Dimensions
4 x 4 x 0.95mm
Detalhes do produto
NCS5651MNTXG Dual Operational Amplifier, ON Semiconductor
The NCS5651 is a high efficiency, class A/B, low distortion power line driver. It is optimised to accept a signal from a Power Line Carrier modem. It incorporates two Operational Amplifiers (op-amps). The output op-amp is designed to drive up to 2 A peak. At the output current of 1.5 A, the output voltage is guaranteed to swing within 1 V or less of either rail, giving the user improved SNR. In addition to the output amplifier, the small-signal provided op-amp can be configured as a unity gain follower buffer or it can provide a stage of a 4-pole low pass filter.
The NCS5651 offers a current limit programmable with a single resistor. The device provides also two independent thermal flags with hysteresis. The thermal warning flag shows when the internal junction temperature has reached a user programmable thermal warning threshold. The thermal error flag indicates that the internal junction temperature has exceeded 150°C.
Typical applications are Power Line Communication (PLC) applications, actuators and motors drivers and any applications where a robust power amplifier is required