Documentos Técnicos
Especificações
Brand
Phoenix ContactAccessory Type
Marker Strip
For Use With
Terminal Block
Series
ZB
Mounting Type
Snapped
Hazardous Area Certification
ATEX
País de Origem
Germany
Detalhes do produto
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 13,92
Each (In a Pack of 5) (Sem VAT)
5
R$ 13,92
Each (In a Pack of 5) (Sem VAT)
5
Documentos Técnicos
Especificações
Brand
Phoenix ContactAccessory Type
Marker Strip
For Use With
Terminal Block
Series
ZB
Mounting Type
Snapped
Hazardous Area Certification
ATEX
País de Origem
Germany
Detalhes do produto
ST 4-FSI/C DIN Rail Terminal Blocks - Phoenix Contact
The ST 4-FSI/C range from Phoenix Contact are DIN rail, spring-cage terminal blocks that feature a C type fuse. This range of DIN rail, fused terminal blocks form a tight connection to your wire thanks to the spring-cage technology, it also means an effortless install! Simply push-in your wire. Not to mention, the fuse in this terminal block is a flat fuse and helps add another level of protection. DIN rails NS 35/7.5 and NS 35/15 are supported for the ST 4-FSI/C range of terminal blocks and the blocks have a nominal current of 30 A with a nominal voltage of 400 V.
The housing on these fused terminal blocks is made from a durable polyamide material and the contacts are copper with a plating. These devices accept 28-10 AWG and have a cross-section of 0.08 mm² - 6 mm².