Documentos Técnicos
Especificações
Brand
Phoenix ContactModule Type
Signal Duplicator
Input Signal Type
Current, Voltage
Output Signal Type
Current, Voltage
Input Range
0 → 12 V, 0 → 24mA
Output Range
0 → 10.5 V, 0 → 21mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-40 → +70°C
Series
MINI MCR
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+70°C
Termination
Push-In
Distrelec Product Id
30103307
País de Origem
Germany
Detalhes do produto
MINI MCR - Signal Duplicators
The 2905026 from Phoenix Contact is a 4-way, configurable signal duplicator. This module can process inputs from 0mA – 24mA and an input voltage of 0V – 12V, while outputting 0mA – 21mA and an output voltage of 0V – 10.5V. The 2905026 has plug-in technology to allow for an easier setup and is approved with an ATEX zone-2 installation rating.
The module can be configured with either the easy to access DIP switch on the side, or can be programmed via an S-PORT using FDT/DTM.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 6.416,12
Each (Sem VAT)
1
R$ 6.416,12
Each (Sem VAT)
1
Documentos Técnicos
Especificações
Brand
Phoenix ContactModule Type
Signal Duplicator
Input Signal Type
Current, Voltage
Output Signal Type
Current, Voltage
Input Range
0 → 12 V, 0 → 24mA
Output Range
0 → 10.5 V, 0 → 21mA
Supply Voltage
24V dc
Hazardous Area Certification
ATEX
Mounting Type
DIN Rail Mount
Operating Temperature Range
-40 → +70°C
Series
MINI MCR
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+70°C
Termination
Push-In
Distrelec Product Id
30103307
País de Origem
Germany
Detalhes do produto
MINI MCR - Signal Duplicators
The 2905026 from Phoenix Contact is a 4-way, configurable signal duplicator. This module can process inputs from 0mA – 24mA and an input voltage of 0V – 12V, while outputting 0mA – 21mA and an output voltage of 0V – 10.5V. The 2905026 has plug-in technology to allow for an easier setup and is approved with an ATEX zone-2 installation rating.
The module can be configured with either the easy to access DIP switch on the side, or can be programmed via an S-PORT using FDT/DTM.