Phoenix Contact3210059 PT 2.5/1P-PE Series Earth Terminal Block, 0.14 → 4mm², Single-Level, Plug In Termination
Documentos Técnicos
Especificações
Brand
Phoenix ContactColour
Green/Yellow
Number of Levels
Single
American Wire Gauge
26 → 12AWG
Series
PT 2.5/1P-PE
Termination Method
Plug In
Cable CSA
0.14 → 4mm²
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
EAC
Model Number
PT 2,5/1P-PE
País de Origem
Germany
Detalhes do produto
Pluggable Feed-Through Terminal Blocks with Push-In Connection
Pluggable modular terminal blocks with PT Push-In technology for the modular set-up of control cabinets and systems. The COMBI plug connectors with PIT Push-In connection can be used for signal as well as power wiring. Respective ground terminal blocks are available in the same shape as the basic terminal blocks.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 702,80
R$ 70,28 Each (In a Pack of 10) (Sem VAT)
10
R$ 702,80
R$ 70,28 Each (In a Pack of 10) (Sem VAT)
10
Documentos Técnicos
Especificações
Brand
Phoenix ContactColour
Green/Yellow
Number of Levels
Single
American Wire Gauge
26 → 12AWG
Series
PT 2.5/1P-PE
Termination Method
Plug In
Cable CSA
0.14 → 4mm²
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
EAC
Model Number
PT 2,5/1P-PE
País de Origem
Germany
Detalhes do produto
Pluggable Feed-Through Terminal Blocks with Push-In Connection
Pluggable modular terminal blocks with PT Push-In technology for the modular set-up of control cabinets and systems. The COMBI plug connectors with PIT Push-In connection can be used for signal as well as power wiring. Respective ground terminal blocks are available in the same shape as the basic terminal blocks.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.