Phoenix Contact3244410 PTIO 1.5/S/3 Series DIN Rail Terminal Block, 1.5mm², Triple-Level, Push In Termination
Documentos Técnicos
Especificações
Brand
Phoenix ContactColour
Grey
Number of Levels
Triple
American Wire Gauge
26 → 14AWG
Series
PTIO 1.5/S/3
Termination Method
Push In
Cable CSA
1.5mm²
Voltage Rating
250 V
Current Rating
13.5A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
CSA, cUL, cULus, EAC, UL
Model Number
PTIO 1,5/S/3
País de Origem
Poland
Detalhes do produto
PTIO Sensor/Actuator, DIN rail terminal blocks - Phoenix Contact
PTIO DIN rail terminal blocks from Phoenix Contact are effortless push-in connection terminal blocks. These terminal blocks are small, save time with push-in technology and are designed to be used with modern machines for sensing/actuators. Although they're small in size, these devices are designed to mount onto DIN rails that are sized NS 35/7.5 or NS 35/15 and can accept an AWG of 26-14. Housings are made from a strong yet durable polyamide material.
Colours on the conductor entrance easily help you wire correctly and assist you with what conductor should go into what port.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 73,00
Each (In a Pack of 5) (Sem VAT)
5
R$ 73,00
Each (In a Pack of 5) (Sem VAT)
5
Documentos Técnicos
Especificações
Brand
Phoenix ContactColour
Grey
Number of Levels
Triple
American Wire Gauge
26 → 14AWG
Series
PTIO 1.5/S/3
Termination Method
Push In
Cable CSA
1.5mm²
Voltage Rating
250 V
Current Rating
13.5A
Minimum Operating Temperature
-60°C
Maximum Operating Temperature
+105°C
Standards Met
CSA, cUL, cULus, EAC, UL
Model Number
PTIO 1,5/S/3
País de Origem
Poland
Detalhes do produto
PTIO Sensor/Actuator, DIN rail terminal blocks - Phoenix Contact
PTIO DIN rail terminal blocks from Phoenix Contact are effortless push-in connection terminal blocks. These terminal blocks are small, save time with push-in technology and are designed to be used with modern machines for sensing/actuators. Although they're small in size, these devices are designed to mount onto DIN rails that are sized NS 35/7.5 or NS 35/15 and can accept an AWG of 26-14. Housings are made from a strong yet durable polyamide material.
Colours on the conductor entrance easily help you wire correctly and assist you with what conductor should go into what port.
Push-In Connection Terminal Blocks
The PT series is characterised by easy, direct conductor connection, and it consistently uses the advantages of the CLIPLINE complete system. The up to 50% lower insertion forces of the PT push-in connection method also allows easy and direct plugging of solid and stranded conductors with ferrules of 0.34mm2 and up.