BASEC Red 2C 1.5mm Enhanced Fire Cable
Documentos Técnicos
Especificações
Brand
RS ProCross Sectional Area
1.5 mm²
Number of Cores
2
Sheath Colour
Red
Length
100m
Cable Type
Fire Performance
Current Rating
19.5 A
Outer Diameter
9.3mm
Voltage Rating
500 V
Conductor Strand Type
Solid
Maximum Operating Temperature
+90°C
American Wire Gauge
15 AWG
Conductor Resistance
12.1 Ω/km
Insulation material
Silicone
Fire Behaviour
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Standards Met
BASEC
Conductor Material
Annealed Copper
Series
Enhanced
País de Origem
United Kingdom
Detalhes do produto
BASEC Enhanced Fire Cable
In buildings where you require the very best fire protection such as schools, colleges, public buildings the 2 hour duration provided by an 'Enhanced' Fire Cable is now under demand. This range of cables provide just that as they have been independently tested and approved by BASEC to meet the 'Enhanced' standard of BS 5839-1 2002+A2:2008 Clause 26.2e, BS 8434 - 2:2003 120 minutes and BS EN 50200 Class PH30, PH60 & PH120.
The design adds simple but effective strength and makes preparation for, and actual installation, quick and easy compared to other fire enhanced cables. The outer sheath and foil are adhered so together are removed at the same time, no time consuming multiple sheaths, foils, wraps or mica tapes to remove and flexibility is good.
The NoBurn Plus soft skin fire cable provides a cost effective quick to install alternative to MICC cables.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificações
Brand
RS ProCross Sectional Area
1.5 mm²
Number of Cores
2
Sheath Colour
Red
Length
100m
Cable Type
Fire Performance
Current Rating
19.5 A
Outer Diameter
9.3mm
Voltage Rating
500 V
Conductor Strand Type
Solid
Maximum Operating Temperature
+90°C
American Wire Gauge
15 AWG
Conductor Resistance
12.1 Ω/km
Insulation material
Silicone
Fire Behaviour
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Standards Met
BASEC
Conductor Material
Annealed Copper
Series
Enhanced
País de Origem
United Kingdom
Detalhes do produto
BASEC Enhanced Fire Cable
In buildings where you require the very best fire protection such as schools, colleges, public buildings the 2 hour duration provided by an 'Enhanced' Fire Cable is now under demand. This range of cables provide just that as they have been independently tested and approved by BASEC to meet the 'Enhanced' standard of BS 5839-1 2002+A2:2008 Clause 26.2e, BS 8434 - 2:2003 120 minutes and BS EN 50200 Class PH30, PH60 & PH120.
The design adds simple but effective strength and makes preparation for, and actual installation, quick and easy compared to other fire enhanced cables. The outer sheath and foil are adhered so together are removed at the same time, no time consuming multiple sheaths, foils, wraps or mica tapes to remove and flexibility is good.
The NoBurn Plus soft skin fire cable provides a cost effective quick to install alternative to MICC cables.