RS PRO Enclosure Heater, 230V ac, 200W Output, 200W Input 140mm x 115 mm
Documentos Técnicos
Especificações
Brand
RS ProProduct Type
Enclosure Heater
Output Power
200W
Input Power
200W
Supply Voltage
230V ac
Depth
115mm
Connection Type
Screw
Mount Type
Screw
Width
140mm
IP Rating
IP20
Minimum Operating Temperature
-55°C
Mounting Position
Horizontal
Insulated PTC
No
Maximum Operating Temperature
155°C
Standards/Approvals
RoHS
Nominal Current
0.86A
Frequency
60Hz
País de Origem
United Kingdom
Detalhes do produto
RS PRO Anti-Condensation Heaters
A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.
A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.
Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.
A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.
Informações de estoque temporariamente indisponíveis.
R$ 2.857,68
R$ 2.857,68 Each (Sem VAT)
1
R$ 2.857,68
R$ 2.857,68 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 9 | R$ 2.857,68 |
| 10 - 24 | R$ 2.803,01 |
| 25 - 49 | R$ 2.695,13 |
| 50+ | R$ 2.532,08 |
Documentos Técnicos
Especificações
Brand
RS ProProduct Type
Enclosure Heater
Output Power
200W
Input Power
200W
Supply Voltage
230V ac
Depth
115mm
Connection Type
Screw
Mount Type
Screw
Width
140mm
IP Rating
IP20
Minimum Operating Temperature
-55°C
Mounting Position
Horizontal
Insulated PTC
No
Maximum Operating Temperature
155°C
Standards/Approvals
RoHS
Nominal Current
0.86A
Frequency
60Hz
País de Origem
United Kingdom
Detalhes do produto
RS PRO Anti-Condensation Heaters
A robust anti-condensation heater designed for use in switch gear and control gear cabinets where a low wattage solution is essential to prevent condensation by maintaining the temperature above dew point.
A hardwearing condensation heater constructed from a vitreous enamelled resistor mounted in a sturdy sheet Steel casing surrounded by a protective and removable perforated sheet Steel cover.
Featuring a cable grommet on both ends providing a tight and secure cable terminated with M4 terminal screws for easy installation.
A high-quality low wattage solution to condensation protecting sensitive parts and electronics perfect for switch and control cabinets.