RS PRO Mains Test Block, 440 V ac, 16A Quick Connector
Documentos Técnicos
Especificações
Brand
RS ProProduct Type
Mains Test Block
Voltage
440 V ac
Circuit Type
Current
Sub Type
Power Connector
Current
16A
Cord Included
No
Contact Configuration
On-Off
Connector Type
Quick Connector
Colour
Red
Width
100 mm
Height
49mm
Depth
160mm
Standards/Approvals
No
País de Origem
United Kingdom
Detalhes do produto
RS PRO Mains Test Block
This three phase quicktest QT3 test power Connector is a compact, robust, power connector designed for temporary, safe and efficient connection of unterminated cables to 440Vac three-phase power supplies. The QT3 has a maximum rating of 16 amps.
The QT3 is designed for use in applications including manufacturing, test and repair, calibration, measurement, and anywhere a fast, safe and non-permanent connection to a three-phase power supply is required.
Connection to the Quickest takes just a few seconds. Simply open the lid, which automatically isolates the three phase supply, insert each bare cable end by pressing the five colour-coded piano key cable clips, and then close the lid to complete the circuit between the device being tested and the main electrical power supply. Opening the lid again isolates the supply source so the conductors can be rapidly removed.
Warning
Always connect the earth connection for safety.
Always use in conjunction with an RCD; for a suitable device, consider RS 825-6093
Informações de estoque temporariamente indisponíveis.
R$ 1.886,36
R$ 1.886,36 Each (Sem VAT)
1
R$ 1.886,36
R$ 1.886,36 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
Documentos Técnicos
Especificações
Brand
RS ProProduct Type
Mains Test Block
Voltage
440 V ac
Circuit Type
Current
Sub Type
Power Connector
Current
16A
Cord Included
No
Contact Configuration
On-Off
Connector Type
Quick Connector
Colour
Red
Width
100 mm
Height
49mm
Depth
160mm
Standards/Approvals
No
País de Origem
United Kingdom
Detalhes do produto
RS PRO Mains Test Block
This three phase quicktest QT3 test power Connector is a compact, robust, power connector designed for temporary, safe and efficient connection of unterminated cables to 440Vac three-phase power supplies. The QT3 has a maximum rating of 16 amps.
The QT3 is designed for use in applications including manufacturing, test and repair, calibration, measurement, and anywhere a fast, safe and non-permanent connection to a three-phase power supply is required.
Connection to the Quickest takes just a few seconds. Simply open the lid, which automatically isolates the three phase supply, insert each bare cable end by pressing the five colour-coded piano key cable clips, and then close the lid to complete the circuit between the device being tested and the main electrical power supply. Opening the lid again isolates the supply source so the conductors can be rapidly removed.
Warning
Always connect the earth connection for safety.
Always use in conjunction with an RCD; for a suitable device, consider RS 825-6093