RS PRO Radial Flow Turbine Flow Meter for Liquid, 0.25 L/min Min, 6.5 L/min Max
Documentos Técnicos
Especificações
Brand
RS ProMedia Monitored
Liquid
Device Type
Radial Flow Turbine
Minimum Flow Rate
0.25 L/min
Maximum Flow Rate
6.5 L/min
Supply Voltage
4.5 → 16 V dc
Pipe Diameter Range
15 mm
Maximum Pressure
20bar
Material
Acetal Copolymer
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+70°C
Current Rating
10 mA
País de Origem
United Kingdom
Detalhes do produto
RS PRO Liquid Flow Sensors
RS PRO flow transducers manufactured in acetal copolymer with brass compression fittings at both ends to fit 15 mm diameter pipe connections. These flow sensors are designed to tailor the transducer to any particular requirements and needs of the user. A variety of pipe connections, electrical terminations and flow ranges are possible giving several possible ways in which it can be arranged that should satisfy various applications.
Before installing flow sensors there are a few things to consider which are bends, valves, flow regulators, tee junctions and other fittings with cause the flow to travel faster at one side of the pipe relative to the other. This asymmetry in the flow can affect the calibration and the disturbance should be as far removed from the sensor as possible and ideally put after the flow sensor. Turbine transducers are affected by viscosity and where possible the viscosity (temperature) of the liquid should be kept fairly constant.
Sensor options include:
257-149 - Grey liquid flow sensor,0.25 to 6.5 l/min, 500Hz, 4600 pulses/litre
257-133 - Beige liquid flow sensor,1.5 to 30 l/min, 600Hz, 1200 pulses/litre
These RS PRO flow transducers have been manufactured to the highest standards and with correct installation and maintenance they will last a long time with reliable operation throughout.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 1.349,71
Each (Sem VAT)
1
R$ 1.349,71
Each (Sem VAT)
1
Documentos Técnicos
Especificações
Brand
RS ProMedia Monitored
Liquid
Device Type
Radial Flow Turbine
Minimum Flow Rate
0.25 L/min
Maximum Flow Rate
6.5 L/min
Supply Voltage
4.5 → 16 V dc
Pipe Diameter Range
15 mm
Maximum Pressure
20bar
Material
Acetal Copolymer
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
+70°C
Current Rating
10 mA
País de Origem
United Kingdom
Detalhes do produto
RS PRO Liquid Flow Sensors
RS PRO flow transducers manufactured in acetal copolymer with brass compression fittings at both ends to fit 15 mm diameter pipe connections. These flow sensors are designed to tailor the transducer to any particular requirements and needs of the user. A variety of pipe connections, electrical terminations and flow ranges are possible giving several possible ways in which it can be arranged that should satisfy various applications.
Before installing flow sensors there are a few things to consider which are bends, valves, flow regulators, tee junctions and other fittings with cause the flow to travel faster at one side of the pipe relative to the other. This asymmetry in the flow can affect the calibration and the disturbance should be as far removed from the sensor as possible and ideally put after the flow sensor. Turbine transducers are affected by viscosity and where possible the viscosity (temperature) of the liquid should be kept fairly constant.
Sensor options include:
257-149 - Grey liquid flow sensor,0.25 to 6.5 l/min, 500Hz, 4600 pulses/litre
257-133 - Beige liquid flow sensor,1.5 to 30 l/min, 600Hz, 1200 pulses/litre
These RS PRO flow transducers have been manufactured to the highest standards and with correct installation and maintenance they will last a long time with reliable operation throughout.