RS PRO TG-PCM-20G Series Thermal Interface Sheet, 0.06 mm Thick, 2.5 W/mK, 150 mm, 150mm
Documentos Técnicos
Especificações
Brand
RS ProProduct Type
Thermal Interface Sheet
Thickness
0.06mm
Thermal Conductivity
2.5W/mK
Self-Adhesive
No
Trade Name
Thermal Interface Pad
Length
150mm
Standards/Approvals
REACH, RoHS
Width
150mm
Colour
Grey
Maximum Operating Temperature
125°C
Minimum Operating Temperature
-45°C
Series
TG-PCM-20G
País de Origem
Taiwan, Province Of China
Detalhes do produto
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.
Informações de estoque temporariamente indisponíveis.
R$ 336,90
R$ 336,90 Each (Sem VAT)
1
R$ 336,90
R$ 336,90 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 9 | R$ 336,90 |
| 10 - 24 | R$ 314,39 |
| 25 - 49 | R$ 305,57 |
| 50+ | R$ 299,41 |
Documentos Técnicos
Especificações
Brand
RS ProProduct Type
Thermal Interface Sheet
Thickness
0.06mm
Thermal Conductivity
2.5W/mK
Self-Adhesive
No
Trade Name
Thermal Interface Pad
Length
150mm
Standards/Approvals
REACH, RoHS
Width
150mm
Colour
Grey
Maximum Operating Temperature
125°C
Minimum Operating Temperature
-45°C
Series
TG-PCM-20G
País de Origem
Taiwan, Province Of China
Detalhes do produto
RS PRO Phase Change Interface Material
RS PRO phase change materials are ideal for thermal management applications. Available in this range are phase change interface materials in sheets, resistor pads and as a dispensable paste.
Phase change materials work because they change their state with changes in temperature between the heat source and the heatsink. During this process, the material stores thermal energy which is then released as the material cools. This means that the material can absorb thermal energy as the heat is generated which helps to keep the desired component cool. This improves contact between the surfaces, completely fillling air gaps and increasing heat transfer.