Documentos Técnicos
Especificações
Brand
Sensata / Cynergy3Device Type
Float
Mounting Type
Horizontal
Switch Output
Direct Load
Body Material
Stainless Steel
Cable Length
350mm
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+120°C
Maximum ac Voltage
300V
Maximum dc Voltage
300V
Maximum Current
500 mA
Maximum Pressure
40bar
Series
SSF29
Current Rating
500 mA
País de Origem
Japan
Detalhes do produto
Stainless Steel High Pressure Float Switch – Horizontal Mount
Side mount vertical float switches designed to achieve reliable switching at high pressures. The switch can be mounted to the side of the tank from the inside and is suitable for use in pressurised chambers containing liquid chemicals or food processing liquids.
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 3.873,35
R$ 3.873,35 Each (Sem VAT)
1
R$ 3.873,35
R$ 3.873,35 Each (Sem VAT)
1
Documentos Técnicos
Especificações
Brand
Sensata / Cynergy3Device Type
Float
Mounting Type
Horizontal
Switch Output
Direct Load
Body Material
Stainless Steel
Cable Length
350mm
Minimum Operating Temperature
-10°C
Maximum Operating Temperature
+120°C
Maximum ac Voltage
300V
Maximum dc Voltage
300V
Maximum Current
500 mA
Maximum Pressure
40bar
Series
SSF29
Current Rating
500 mA
País de Origem
Japan
Detalhes do produto
Stainless Steel High Pressure Float Switch – Horizontal Mount
Side mount vertical float switches designed to achieve reliable switching at high pressures. The switch can be mounted to the side of the tank from the inside and is suitable for use in pressurised chambers containing liquid chemicals or food processing liquids.
Warning
The Cable entry point must NOT under any circumstances be submerged.
On the Horizontal switches they must be fitted through the wall of a tank so that the cable is on the outside.
On the vertical type the mounting thread and cable entry must be above the highest level of the liquid.