Sensirion SDP2000 Series Pressure Sensor, -100Pa Min, 3500Pa Max, Analogue Output, Differential Reading
Documentos Técnicos
Especificações
Analogue Output
0.25 → 4 V
IP Rating
IP20
Minimum Pressure Reading
-100Pa
Pressure Reading Type
Differential
Maximum Operating Temperature
+60°C
Media Measured
Air, Non-Aggressive Gas
Accuracy
0.2 %, 1.5 %
Minimum Operating Temperature
-10°C
Output Type
Analogue
Maximum Current
5.2 mA
Electrical Connection
3 Pin SMD Connector
Maximum Pressure Reading
3500Pa
Supply Voltage
4.75 → 5.25 V
Response Time
40 ms
Housing Material
PPS
Brand
SensirionSeries
SDP2000
País de Origem
Switzerland
Detalhes do produto
LDC1314 Evaluation Module for Inductance-to-Digital Converter with Sample PCB Coils, Texas Instruments
The LDC1314 Evaluation Module demonstrates the use of inductive sensing technology to sense and measure the presence, position or composition of a conductive target object. The LDC1314 is a 4-channel, 12-bit Inductance-to-Digital Converter with I²C for Inductive Sensing. The module includes two example PCB sensor coils but can connect to the four channels of the LDC1314. An MSP430 microcontroller is used to interface the Inductance-to-Digital Converter to a host computer.
Inductance to Digital Converters - Texas Instruments
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 1.928,76
Each (Supplied in a Tray) (Sem VAT)
25
R$ 1.928,76
Each (Supplied in a Tray) (Sem VAT)
25
Documentos Técnicos
Especificações
Analogue Output
0.25 → 4 V
IP Rating
IP20
Minimum Pressure Reading
-100Pa
Pressure Reading Type
Differential
Maximum Operating Temperature
+60°C
Media Measured
Air, Non-Aggressive Gas
Accuracy
0.2 %, 1.5 %
Minimum Operating Temperature
-10°C
Output Type
Analogue
Maximum Current
5.2 mA
Electrical Connection
3 Pin SMD Connector
Maximum Pressure Reading
3500Pa
Supply Voltage
4.75 → 5.25 V
Response Time
40 ms
Housing Material
PPS
Brand
SensirionSeries
SDP2000
País de Origem
Switzerland
Detalhes do produto
LDC1314 Evaluation Module for Inductance-to-Digital Converter with Sample PCB Coils, Texas Instruments
The LDC1314 Evaluation Module demonstrates the use of inductive sensing technology to sense and measure the presence, position or composition of a conductive target object. The LDC1314 is a 4-channel, 12-bit Inductance-to-Digital Converter with I²C for Inductive Sensing. The module includes two example PCB sensor coils but can connect to the four channels of the LDC1314. An MSP430 microcontroller is used to interface the Inductance-to-Digital Converter to a host computer.