SICK Resolution Set for Use with V200 Series, V300 Series

Nº de Estoque RS: 701-9244Marca: SICKPart Number: Resolution Set 30mm for V200 & V300
brand-logo
Ver tudo em Sensor Accessories

Documentos Técnicos

Especificações

Brand

Sick

Accessory Type

Resolution Set

For Use With

V200 Series, V300 Series

País de Origem

Germany

Detalhes do produto

V20 and V30 Quick Install Safety Camera

The V300 WS is a completely new sensor based on innovative camera technology, developed for monitoring hazardous points on typically rectangular action openings – with just one component, mounted in a corner of the safety area, saving space and in a protected location. The “one sensor fits all sizes” concept puts an end to the numerous types – one variant covers the most diverse safety areas up to a maximum width of 1 m and with a maximum side ratio of 2:1. The optics used have a wide aperture angle, the invisible LED light beam in combination with the reflector ensures robust monitoring that is resistant to environmental factors. The V300 WS is Type 3 (SIL2) and is thus a real substitute for Type 4 solutions while the V200 WS is a convincing economical solution if only Type 2 is required.

Safety Camera

Você pode estar interessado em

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 4.121,02

R$ 4.121,02 Each (Sem VAT)

SICK Resolution Set for Use with V200 Series, V300 Series

R$ 4.121,02

R$ 4.121,02 Each (Sem VAT)

SICK Resolution Set for Use with V200 Series, V300 Series
Informações de estoque temporariamente indisponíveis.
Você pode estar interessado em

Documentos Técnicos

Especificações

Brand

Sick

Accessory Type

Resolution Set

For Use With

V200 Series, V300 Series

País de Origem

Germany

Detalhes do produto

V20 and V30 Quick Install Safety Camera

The V300 WS is a completely new sensor based on innovative camera technology, developed for monitoring hazardous points on typically rectangular action openings – with just one component, mounted in a corner of the safety area, saving space and in a protected location. The “one sensor fits all sizes” concept puts an end to the numerous types – one variant covers the most diverse safety areas up to a maximum width of 1 m and with a maximum side ratio of 2:1. The optics used have a wide aperture angle, the invisible LED light beam in combination with the reflector ensures robust monitoring that is resistant to environmental factors. The V300 WS is Type 3 (SIL2) and is thus a real substitute for Type 4 solutions while the V200 WS is a convincing economical solution if only Type 2 is required.

Safety Camera

Você pode estar interessado em