SKF HK 1010 E 10 mm ID Roller Bearing Needle, 14 mm OD
Documentos Técnicos
Especificações
Brand
SKFProduct Type
Roller Bearing
Inside Diameter
10mm
Race Width
10mm
Bore Type
Parallel
Cage Material
Steel
Static Load Rating
5.3kN
Outside Diameter
14mm
Dynamic Load Rating
4.29kN
End Type
Open
Standards/Approvals
No
Maximum Speed - Oil
24000rpm
Maximum Speed - Grease
16000rpm
Limiting Speed
20000rpm
Bearing Type
Needle
Detalhes do produto
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Informações de estoque temporariamente indisponíveis.
R$ 109,04
R$ 109,04 Each (Sem VAT)
1
R$ 109,04
R$ 109,04 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 4 | R$ 109,04 |
| 5 - 9 | R$ 106,58 |
| 10 - 24 | R$ 105,95 |
| 25+ | R$ 105,49 |
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Documentos Técnicos
Especificações
Brand
SKFProduct Type
Roller Bearing
Inside Diameter
10mm
Race Width
10mm
Bore Type
Parallel
Cage Material
Steel
Static Load Rating
5.3kN
Outside Diameter
14mm
Dynamic Load Rating
4.29kN
End Type
Open
Standards/Approvals
No
Maximum Speed - Oil
24000rpm
Maximum Speed - Grease
16000rpm
Limiting Speed
20000rpm
Bearing Type
Needle
Detalhes do produto
SKF Drawn Cup Needle Roller Bearings Series HK
SKF Drawn cup needle roller bearings have a deep drawn, thin-walled outer ring with open ends (indicated by the HK prefix).,They are characterised by very low sectional height and high load carrying capacity.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products