SKF Hand Bearing Puller, 200.0 cm³ Capacity, 400.0MPa Force

Nº de Estoque RS: 885-5322Marca: SKFPart Number: THAP 400E/K10
brand-logo
Ver tudo em Bearing Pullers

Documentos Técnicos

Especificações

Brand

SKF

Puller Type

Bearing Puller

Capacity

200.0 cm³

Hydraulic Force

400.0MPa

Operation

Hand

País de Origem

Netherlands

Detalhes do produto

SKF Oil Injection Kit - 729101 Series

SKF's oil injection kits provide a safe, efficient and easy way to remove or install bearings on shafts. Suitable for interference fit bearings on both tapered and cylindrical shafts. Oil is injected into oilways machined into the shaft during manufacture. The oil creates a layer between the bearing and shaft that significantly reduces the amount of force required fit or remove the bearing to the shaft. Suitable for use with propellers, rolling bearings, couplings, gears, pulleys and flywheels where the surface pressure is less than 250 N/mm2 (8211251) or 350 N/mm2 (8211255).

Oil Injection Kits

Você pode estar interessado em

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

P.O.A.

SKF Hand Bearing Puller, 200.0 cm³ Capacity, 400.0MPa Force

1

Disponível em múltiplos de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

SKF Hand Bearing Puller, 200.0 cm³ Capacity, 400.0MPa Force
Informações de estoque temporariamente indisponíveis.

1

Disponível em múltiplos de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.
Você pode estar interessado em

Documentos Técnicos

Especificações

Brand

SKF

Puller Type

Bearing Puller

Capacity

200.0 cm³

Hydraulic Force

400.0MPa

Operation

Hand

País de Origem

Netherlands

Detalhes do produto

SKF Oil Injection Kit - 729101 Series

SKF's oil injection kits provide a safe, efficient and easy way to remove or install bearings on shafts. Suitable for interference fit bearings on both tapered and cylindrical shafts. Oil is injected into oilways machined into the shaft during manufacture. The oil creates a layer between the bearing and shaft that significantly reduces the amount of force required fit or remove the bearing to the shaft. Suitable for use with propellers, rolling bearings, couplings, gears, pulleys and flywheels where the surface pressure is less than 250 N/mm2 (8211251) or 350 N/mm2 (8211255).

Oil Injection Kits

Você pode estar interessado em