STEGO Changeover Enclosure Thermostat, 12 → 48 V, -20 → +60 °C

Nº de Estoque RS: 901-0586Marca: STEGOPart Number: 01131.2-00
brand-logo
View all in Termostato

Documentos Técnicos

Especificações

Brand

STEGO

Switch Configuration

Changeover

Supply Voltage

12 → 48 V

Maximum Temperature

+60 °C

Minimum Temperature

-20 °C

Temperature Range

-20 → +60 °C

País de Origem

Germany

Detalhes do produto

Stego Electronic Thermostat 12-48Vdc, ETL 011

ETL 011 range of electronic thermostats register the air temperature and can switch signal currents using an internal relay. The ETL 011 can control signal processing devices directly. If the application system requires you to control heating and cooling equipment such as filter fans a switch module is required.The status of the contacts 1-2 is shown via the LED integrated into the adjustment knob.

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

P.O.A.

STEGO Changeover Enclosure Thermostat, 12 → 48 V, -20 → +60 °C

1

Disponível em múltiplos de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

STEGO Changeover Enclosure Thermostat, 12 → 48 V, -20 → +60 °C
Informações de estoque temporariamente indisponíveis.

1

Disponível em múltiplos de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Documentos Técnicos

Especificações

Brand

STEGO

Switch Configuration

Changeover

Supply Voltage

12 → 48 V

Maximum Temperature

+60 °C

Minimum Temperature

-20 °C

Temperature Range

-20 → +60 °C

País de Origem

Germany

Detalhes do produto

Stego Electronic Thermostat 12-48Vdc, ETL 011

ETL 011 range of electronic thermostats register the air temperature and can switch signal currents using an internal relay. The ETL 011 can control signal processing devices directly. If the application system requires you to control heating and cooling equipment such as filter fans a switch module is required.The status of the contacts 1-2 is shown via the LED integrated into the adjustment knob.