Documentos Técnicos
Especificações
Brand
STMicroelectronicsMotor Type
BLDC
Output Configuration
3 Phase
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Pin Count
36
Maximum Operating Supply Voltage
52 V
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Height
3.3mm
Width
11.1mm
Minimum Operating Temperature
-40 °C
Dimensions
16 x 11.1 x 3.3mm
Maximum Operating Temperature
+150 °C
Length
16mm
País de Origem
Malaysia
Detalhes do produto
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.
Motor Controllers & Drivers, STMicroelectronics
Informações de estoque temporariamente indisponíveis.
R$ 5.715,78
R$ 184,38 Each (In a Tube of 31) (Sem VAT)
31
R$ 5.715,78
R$ 184,38 Each (In a Tube of 31) (Sem VAT)
Informações de estoque temporariamente indisponíveis.
31
| Quantidade | Preço unitário | Per Tubo |
|---|---|---|
| 31 - 62 | R$ 184,38 | R$ 5.715,78 |
| 93 - 217 | R$ 182,15 | R$ 5.646,65 |
| 248 - 465 | R$ 179,98 | R$ 5.579,38 |
| 496 - 961 | R$ 178,01 | R$ 5.518,31 |
| 992+ | R$ 176,16 | R$ 5.460,96 |
Documentos Técnicos
Especificações
Brand
STMicroelectronicsMotor Type
BLDC
Output Configuration
3 Phase
Maximum IGBT Collector Current
1.4A
Maximum Collector Emitter Voltage
52 V
Mounting Type
Surface Mount
Package Type
PowerSO
Pin Count
36
Maximum Operating Supply Voltage
52 V
Minimum Operating Supply Voltage
8 V
Typical Switching Frequency
100kHz
Height
3.3mm
Width
11.1mm
Minimum Operating Temperature
-40 °C
Dimensions
16 x 11.1 x 3.3mm
Maximum Operating Temperature
+150 °C
Length
16mm
País de Origem
Malaysia
Detalhes do produto
Motor Control Power Drivers, STMicroelectronics
The range of power drivers by STMicroelectronics are designed to drive a motor or a complex load through the logic commands at its input. They can be used with microcontrollers, DSPs or FPGAs in a motor or motion control system. The power drivers come in Dual Full Bridge, Full Bridge and 3 phase.


