TE Connectivity, AMP M Guide Pin Kit for use with 16 and 42 Position Mixed Connectors, 20 Position High Voltage
Documentos Técnicos
Especificações
Brand
TE ConnectivityAccessory Type
Guide Pin Kit
Backplane Connector Accessory Type
Guide Pin Kit
For Use With
16 and 42 Position Mixed Connectors, 20 Position High Voltage Connectors, 34 and 50-Position Posted Connectors
Series
AMP M
Detalhes do produto
TE Connectivity M Series Guide Pins and Sockets
M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well as in the centre hole of housings that have 3 or 4 mounting holes. Corner guide pins and sockets are for use in corner holes of housings that have 2 to 4 mounting holes but cannot be used in centre mounting holes.
TE Connectivity M Series Connector
Standard connectors are furnished as unloaded housings that have Multimate contact cavities for accepting Type II, Type
III+, and subminiature COAXICON crimp-type contacts, as well as Type III+ solder-type and posted contacts. All Multimate contacts are interchangeable in the same housing cavity.
R$ 20.292,00
R$ 202,92 Each (In a Bag of 100) (Sem VAT)
100
R$ 20.292,00
R$ 202,92 Each (In a Bag of 100) (Sem VAT)
Informações de estoque temporariamente indisponíveis.
100
Informações de estoque temporariamente indisponíveis.
Documentos Técnicos
Especificações
Brand
TE ConnectivityAccessory Type
Guide Pin Kit
Backplane Connector Accessory Type
Guide Pin Kit
For Use With
16 and 42 Position Mixed Connectors, 20 Position High Voltage Connectors, 34 and 50-Position Posted Connectors
Series
AMP M
Detalhes do produto
TE Connectivity M Series Guide Pins and Sockets
M Series guide pins and sockets made from stainless steel. These guide pins and sockets are used for aligning connector halves during mating. Centre guide pins and sockets are used in housings that have a single mounting hole as well as in the centre hole of housings that have 3 or 4 mounting holes. Corner guide pins and sockets are for use in corner holes of housings that have 2 to 4 mounting holes but cannot be used in centre mounting holes.
TE Connectivity M Series Connector
Standard connectors are furnished as unloaded housings that have Multimate contact cavities for accepting Type II, Type
III+, and subminiature COAXICON crimp-type contacts, as well as Type III+ solder-type and posted contacts. All Multimate contacts are interchangeable in the same housing cavity.