TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG

Nº de Estoque RS: 135-5110Marca: TE ConnectivityPart Number: 454100-000
brand-logo
View all in Splice Connectors

Documentos Técnicos

Especificações

Splice Type

Butt

Wire Size

16 → 14 AWG

Overall Length

31.5mm

Diameter

4.6mm

Insulation

Insulated

Colour

Blue

Series

Duraseal

Contact Material

Copper

Contact Plating

Tin

País de Origem

Mexico

Detalhes do produto

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 13.719,32

1 Box of 1000 (Sem VAT)

TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG

R$ 13.719,32

1 Box of 1000 (Sem VAT)

TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 16 → 14 AWG
Informações de estoque temporariamente indisponíveis.

Documentos Técnicos

Especificações

Splice Type

Butt

Wire Size

16 → 14 AWG

Overall Length

31.5mm

Diameter

4.6mm

Insulation

Insulated

Colour

Blue

Series

Duraseal

Contact Material

Copper

Contact Plating

Tin

País de Origem

Mexico

Detalhes do produto

Splices

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

Approvals

UL Listed