TE Connectivity, DuraSeal Butt Splice Connector, Blue, Insulated, Tin 10 AWG
Documentos Técnicos
Especificações
Brand
TE ConnectivitySplice Type
Butt
Product Type
Splice Connector
Overall Length
31.5mm
Diameter
4.6 mm
Minimum Wire Size AWG
26 AWG
Insulation
Insulated
Maximum Wire Size AWG
10 AWG
Colour
Blue
Insulation Material
Nylon
Series
DuraSeal
Contact Material
Copper
Termination Type
Crimp
Contact Plating
Tin
Standards/Approvals
No
País de Origem
Mexico
Detalhes do produto
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informações de estoque temporariamente indisponíveis.
R$ 1.980,50
R$ 39,61 Each (In a Pack of 50) (Sem VAT)
Padrão
50
R$ 1.980,50
R$ 39,61 Each (In a Pack of 50) (Sem VAT)
Informações de estoque temporariamente indisponíveis.
Padrão
50
| Quantidade | Preço unitário | Per Pacote |
|---|---|---|
| 50 - 200 | R$ 39,61 | R$ 1.980,50 |
| 250+ | R$ 36,88 | R$ 1.844,00 |
Documentos Técnicos
Especificações
Brand
TE ConnectivitySplice Type
Butt
Product Type
Splice Connector
Overall Length
31.5mm
Diameter
4.6 mm
Minimum Wire Size AWG
26 AWG
Insulation
Insulated
Maximum Wire Size AWG
10 AWG
Colour
Blue
Insulation Material
Nylon
Series
DuraSeal
Contact Material
Copper
Termination Type
Crimp
Contact Plating
Tin
Standards/Approvals
No
País de Origem
Mexico
Detalhes do produto
Splices
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed