TE Connectivity, DuraSeal Insulated Ring Terminal, M4 Stud Size 16 AWG 14 AWG Wire Size, Blue
Documentos Técnicos
Especificações
Brand
TE ConnectivitySeries
DuraSeal
Product Type
Ring Terminal
Insulation
Insulated
Insulation Material
Nylon
Outer Ring Diameter
8mm
Inner Ring Diameter
4.3mm
Minimum Wire Size AWG
16 AWG
Maximum Wire Size AWG
14 AWG
Overall Length
33.02mm
Stud Size
M4
Colour
Blue
Contact Material
Copper
Contact Plating
Tin
Standards/Approvals
No
Maximum Operating Temperature
125°C
Minimum Operating Temperature
-55°C
País de Origem
Mexico
Detalhes do produto
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informações de estoque temporariamente indisponíveis.
R$ 884,47
R$ 884,47 1 Box of 25 (Sem VAT)
1
R$ 884,47
R$ 884,47 1 Box of 25 (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
Documentos Técnicos
Especificações
Brand
TE ConnectivitySeries
DuraSeal
Product Type
Ring Terminal
Insulation
Insulated
Insulation Material
Nylon
Outer Ring Diameter
8mm
Inner Ring Diameter
4.3mm
Minimum Wire Size AWG
16 AWG
Maximum Wire Size AWG
14 AWG
Overall Length
33.02mm
Stud Size
M4
Colour
Blue
Contact Material
Copper
Contact Plating
Tin
Standards/Approvals
No
Maximum Operating Temperature
125°C
Minimum Operating Temperature
-55°C
País de Origem
Mexico
Detalhes do produto
Waterproof Duraseal terminals
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed