TE Connectivity, DuraSeal Insulated Ring Terminal, M10 Stud Size 22 AWG 18 AWG Wire Size, Red
Documentos Técnicos
Especificações
Brand
TE ConnectivityProduct Type
Ring Terminal
Series
DuraSeal
Insulation
Insulated
Insulation Material
Nylon
Outer Ring Diameter
18mm
Inner Ring Diameter
10.5mm
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Overall Length
43.18mm
Stud Size
M10
Colour
Red
Contact Material
Copper
Contact Plating
Tin
Standards/Approvals
No
Minimum Wire Size mm²
0.5mm²
Minimum Operating Temperature
-55°C
Maximum Wire Size mm²
1mm²
Maximum Operating Temperature
125°C
País de Origem
Mexico
Detalhes do produto
TE Connectivity DuraSeal Ring Terminals
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed
Informações de estoque temporariamente indisponíveis.
R$ 44,92
R$ 44,92 Each (Sem VAT)
Padrão
1
R$ 44,92
R$ 44,92 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
Padrão
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 4 | R$ 44,92 |
| 5 - 24 | R$ 42,53 |
| 25 - 74 | R$ 40,84 |
| 75 - 149 | R$ 39,02 |
| 150+ | R$ 36,94 |
Documentos Técnicos
Especificações
Brand
TE ConnectivityProduct Type
Ring Terminal
Series
DuraSeal
Insulation
Insulated
Insulation Material
Nylon
Outer Ring Diameter
18mm
Inner Ring Diameter
10.5mm
Minimum Wire Size AWG
22AWG
Maximum Wire Size AWG
18AWG
Overall Length
43.18mm
Stud Size
M10
Colour
Red
Contact Material
Copper
Contact Plating
Tin
Standards/Approvals
No
Minimum Wire Size mm²
0.5mm²
Minimum Operating Temperature
-55°C
Maximum Wire Size mm²
1mm²
Maximum Operating Temperature
125°C
País de Origem
Mexico
Detalhes do produto
TE Connectivity DuraSeal Ring Terminals
DuraSeal crimp ring terminals with an environmentally sealed wire connection providing insulation and protection to electrical connections from mechanical abuse, vibration, wire-pull out, abrasion as well as being resistant to water, salt and other contaminants. The barrels of these DuraSeal crimp ring terminals are covered in a heat-shrinkable nylon tubing lined with a hot-melt adhesive with is cut and abrasion resistant.
Approvals
UL
Duraseal Heatshrinkable
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.
Approvals
UL Listed