TE Connectivity Transparent Polyolefin Solder Sleeve 24.5mm Length 3 mm Cable Diameter 1 mm Cable Diameter
Documentos Técnicos
Especificações
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
24.5mm
Material
Polyolefin
Dielectric Strength
1kV
Minimum Cable Diameter
1mm
Maximum Cable Diameter
3mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
País de Origem
Mexico
Detalhes do produto
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Informações de estoque temporariamente indisponíveis.
R$ 1.704,00
R$ 17,04 Each (In a Pack of 100) (Sem VAT)
100
R$ 1.704,00
R$ 17,04 Each (In a Pack of 100) (Sem VAT)
Informações de estoque temporariamente indisponíveis.
100
| Quantidade | Preço unitário | Per Pacote |
|---|---|---|
| 100 - 1400 | R$ 17,04 | R$ 1.704,00 |
| 1500 - 4900 | R$ 16,40 | R$ 1.640,00 |
| 5000+ | R$ 15,79 | R$ 1.579,00 |
Documentos Técnicos
Especificações
Brand
TE ConnectivityProduct Type
Solder Sleeve
Sub Type
Terminator
Sleeve Length
24.5mm
Material
Polyolefin
Dielectric Strength
1kV
Minimum Cable Diameter
1mm
Maximum Cable Diameter
3mm
Colour
Transparent
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
125°C
Standards/Approvals
ANSI J-STD-004, ANSI J-STD-006
Shrink Temperature
85°C
Series
B-155
País de Origem
Mexico
Detalhes do produto
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.