TE Connectivity Blue PVDF Solder Sleeve 36.1mm Length 1.9 → 4.5mm Cable Diameter

Nº de Estoque RS: 136-2095Marca: TE ConnectivityPart Number: D-110-0181
brand-logo
View all in Mangas de Solda

Documentos Técnicos

Especificações

Brand

TE Connectivity

Minimum Cable Diameter

1.9mm

Maximum Cable Diameter

5mm

Sleeve Length

36.1mm

Material

PVDF

Quantity

500

Colour

Blue

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Series

D-110

País de Origem

Mexico

Detalhes do produto

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

P.O.A.

TE Connectivity Blue PVDF Solder Sleeve 36.1mm Length 1.9 → 4.5mm Cable Diameter

1

Disponível em múltiplos de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

P.O.A.

TE Connectivity Blue PVDF Solder Sleeve 36.1mm Length 1.9 → 4.5mm Cable Diameter
Informações de estoque temporariamente indisponíveis.

1

Disponível em múltiplos de 1
1P.O.A.
2P.O.A.
3P.O.A.
4P.O.A.
5P.O.A.
6P.O.A.
7P.O.A.
8P.O.A.
9P.O.A.
10P.O.A.
11P.O.A.
12P.O.A.
13P.O.A.
14P.O.A.
15P.O.A.

Documentos Técnicos

Especificações

Brand

TE Connectivity

Minimum Cable Diameter

1.9mm

Maximum Cable Diameter

5mm

Sleeve Length

36.1mm

Material

PVDF

Quantity

500

Colour

Blue

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Series

D-110

País de Origem

Mexico

Detalhes do produto

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.