TE Connectivity Blue Polyolefin Solder Sleeve 18.54mm Length 0.76 → 1.52mm Cable Diameter
Documentos Técnicos
Especificações
Brand
TE ConnectivityMinimum Cable Diameter
0.76mm
Maximum Cable Diameter
1.52mm
Sleeve Length
18.54mm
Material
Polyolefin
Voltage Rating
600 V
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+125°C
Colour
Blue
Series
D-110
Standards Met
ANSI J-STD-004, ANSI J-STD-006
País de Origem
Mexico
Detalhes do produto
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 35,39
Each (In a Pack of 500) (Sem VAT)
500
R$ 35,39
Each (In a Pack of 500) (Sem VAT)
500
Comprar em grandes quantidades
| Quantidade | Preço unitário | Per Pacote |
|---|---|---|
| 500 - 7000 | R$ 35,39 | R$ 17.695,00 |
| 7500 - 24500 | R$ 34,14 | R$ 17.070,00 |
| 25000+ | R$ 32,82 | R$ 16.410,00 |
Documentos Técnicos
Especificações
Brand
TE ConnectivityMinimum Cable Diameter
0.76mm
Maximum Cable Diameter
1.52mm
Sleeve Length
18.54mm
Material
Polyolefin
Voltage Rating
600 V
Minimum Operating Temperature
-5°C
Maximum Operating Temperature
+125°C
Colour
Blue
Series
D-110
Standards Met
ANSI J-STD-004, ANSI J-STD-006
País de Origem
Mexico
Detalhes do produto
Solder Sleeves®
A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.