Tridonic 18 W Electronic Fluorescent Lighting Ballast, 220 → 240 V

Nº de Estoque RS: 424-0224Marca: TridonicPart Number: PC 3/4X18 / 33 COMBO 220-240V
brand-logo
Ver tudo em Balastros de Iluminação

Documentos Técnicos

Especificações

Wattage

18 W

Ballast Type

Electronic

Supported Lamp Shape

T8

Supported Lamp Type

Fluorescent

Voltage Rating

220 → 240 V

Dimmable

No

High Frequency

Yes

Length

424 mm

Width

42 mm

Height

28mm

Minimum Operating Temperature

0°C

Maximum Operating Temperature

+50°C

Detalhes do produto

Replacement HF Ballast and Emergency Kit

Conversion Kits

Charger/inverter modules for converting fluorescent luminaires into emergency lighting units.,The module and battery packs fit inside most modern fluorescent batten fittings. For luminaires that have limited internal dimensions or that have internal temperatures above 50°C, remote mounting boxes are also available. The remote box is also suitable for converting double luminaires into emergency units, however only 1 tube will operate under emergency conditions. Two live supplies are required for standard operation, one switched, one unswitched. Failure of the unswitched supply operates the changeover circuit bringing on the battery supply. A red LED is supplied with the module for fitting into either the luminaire or remote box, to indicate a healthy battery charging state. The nickel-cadmium battery packs are protected against deep discharge.

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

P.O.A.

Tridonic 18 W Electronic Fluorescent Lighting Ballast, 220 → 240 V

P.O.A.

Tridonic 18 W Electronic Fluorescent Lighting Ballast, 220 → 240 V
Informações de estoque temporariamente indisponíveis.

Documentos Técnicos

Especificações

Wattage

18 W

Ballast Type

Electronic

Supported Lamp Shape

T8

Supported Lamp Type

Fluorescent

Voltage Rating

220 → 240 V

Dimmable

No

High Frequency

Yes

Length

424 mm

Width

42 mm

Height

28mm

Minimum Operating Temperature

0°C

Maximum Operating Temperature

+50°C

Detalhes do produto

Replacement HF Ballast and Emergency Kit

Conversion Kits

Charger/inverter modules for converting fluorescent luminaires into emergency lighting units.,The module and battery packs fit inside most modern fluorescent batten fittings. For luminaires that have limited internal dimensions or that have internal temperatures above 50°C, remote mounting boxes are also available. The remote box is also suitable for converting double luminaires into emergency units, however only 1 tube will operate under emergency conditions. Two live supplies are required for standard operation, one switched, one unswitched. Failure of the unswitched supply operates the changeover circuit bringing on the battery supply. A red LED is supplied with the module for fitting into either the luminaire or remote box, to indicate a healthy battery charging state. The nickel-cadmium battery packs are protected against deep discharge.