Vishay 36kΩ Metal Film Resistor 2W ±5% PR02000203602JR500
Documentos Técnicos
Especificações
Brand
VishayResistance
36kΩ
Power Rating
2W
Tolerance
±5%
Technology
Metal Film
Series
PR0200
Temperature Coefficient
≤±250ppm/K
Maximum Operating Temperature
+155°C
Minimum Operating Temperature
-55°C
País de Origem
India
Detalhes do produto
PR02 Series 2W, Axial
A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents. The encapsulation is resistant to all cleaning solvents in accordance with IEC 60068-2-45.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
5000
P.O.A.
5000
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Documentos Técnicos
Especificações
Brand
VishayResistance
36kΩ
Power Rating
2W
Tolerance
±5%
Technology
Metal Film
Series
PR0200
Temperature Coefficient
≤±250ppm/K
Maximum Operating Temperature
+155°C
Minimum Operating Temperature
-55°C
País de Origem
India
Detalhes do produto
PR02 Series 2W, Axial
A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents. The encapsulation is resistant to all cleaning solvents in accordance with IEC 60068-2-45.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products