Wago PLC Programming Software for Use with I/O Modules
Documentos Técnicos
Especificações
Detalhes do produto
WAGO-I/O-CHECK - Commissioning Tool For WAGO-I/O-SYSTEM 750
WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO-I/O-SYSTEM 750 node without connecting the node to a fieldbus system.
The software reads the configuration from the node and displays it as an on-screen graphic. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or sensor types, can be made with select interface, Pt100 and thermocouple modules. For communicating between WAGO-I/O-CHECK and the node, the coupler must be connected at a PC’s vacant serial or USB port using the communication cable supplied in the kit with the system.
Wago I/O system range
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 4.078,43
Each (Sem VAT)
1
R$ 4.078,43
Each (Sem VAT)
1
Documentos Técnicos
Especificações
Detalhes do produto
WAGO-I/O-CHECK - Commissioning Tool For WAGO-I/O-SYSTEM 750
WAGO-I/O-CHECK is an easy-to-use Windows application for operating and displaying a WAGO-I/O-SYSTEM 750 node without connecting the node to a fieldbus system.
The software reads the configuration from the node and displays it as an on-screen graphic. The graphic can be printed together with a configuration list as documentation.
With WAGO-I/O-CHECK, it is possible to display and determine the process data of the bus modules. The field wiring, including all sensors and actuators, can thus be checked before startup.
Application-specific settings, such as the baud rate or sensor types, can be made with select interface, Pt100 and thermocouple modules. For communicating between WAGO-I/O-CHECK and the node, the coupler must be connected at a PC’s vacant serial or USB port using the communication cable supplied in the kit with the system.