Bartec Legend Plate for Use with Bartec Push Buttons
Documentos Técnicos
Especificações
Detalhes do produto
Label Holder
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 112,63
R$ 112,63 Each (Sem VAT)
1
R$ 112,63
R$ 112,63 Each (Sem VAT)
1
Comprar em grandes quantidades
| Quantidade | Preço unitário |
|---|---|
| 1 - 4 | R$ 112,63 |
| 5 - 9 | R$ 111,43 |
| 10+ | R$ 107,41 |
Documentos Técnicos
Especificações
Detalhes do produto
Label Holder
Hazardous Area Actuators & Contact Blocks
Panel mounting, with a wide range of switch contact arrangements and elements including; selector switches, key switches, standard pushbuttons and an emergency stop pushbutton. The actuators and lens units require a 30.5mm mounting hole. Ingress protection is to IP66 and they are component-approved in their own right. Switch and lamp modules include three metres of encapsulated cable. Switch modules include a wipe clean action and are rated up to 230Vac/16A (circuit type AC-12). The N/C contact has a positive break action.,The electronic circuitry of each lamp module self configures to allow the lamps to be used over a wide range of ac and dc voltages.,A simple cam arrangement on the modules provides a rapid method for the fitting of the actuators.