Documentos Técnicos
Especificações
Brand
EntrelecColour
Grey
Number of Levels
Single
Series
ZK4
Termination Method
Spring Clamp
Cable CSA
4mm²
Voltage Rating
1 kV
Current Rating
32A
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+110°C
Detalhes do produto
ZK4 PI-Spring Feed-Through Terminal Blocks
ZK4 PI-Spring feed-through Terminal Blocks combine high performance with compact dimensions. The terminals are also the best for marking, with an up-front flat marker zone. This feature lets you mark up to eight digits or increase the font size.
SNK Series PI-Spring Terminal Blocks
PI-Spring technology provides a Smart Connection and the benefits of 2 technologies in 1 connection:
1. 50% faster connection time with Push-In mode (direct insertion - for stranded wire with ferrule or for solid wire, use screwdriver to remove wire).
2. Reduced effort and conductor preparation time with Spring-Mode (use screwdriver to insert and remove non-prepared stranded wires).
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 26,53
Each (In a Pack of 10) (Sem VAT)
10
R$ 26,53
Each (In a Pack of 10) (Sem VAT)
10
Comprar em grandes quantidades
Quantidade | Preço unitário | Per Pacote |
---|---|---|
10 - 50 | R$ 26,53 | R$ 265,30 |
60 - 110 | R$ 26,10 | R$ 261,00 |
120+ | R$ 25,78 | R$ 257,80 |
Documentos Técnicos
Especificações
Brand
EntrelecColour
Grey
Number of Levels
Single
Series
ZK4
Termination Method
Spring Clamp
Cable CSA
4mm²
Voltage Rating
1 kV
Current Rating
32A
Minimum Operating Temperature
-55°C
Maximum Operating Temperature
+110°C
Detalhes do produto
ZK4 PI-Spring Feed-Through Terminal Blocks
ZK4 PI-Spring feed-through Terminal Blocks combine high performance with compact dimensions. The terminals are also the best for marking, with an up-front flat marker zone. This feature lets you mark up to eight digits or increase the font size.
SNK Series PI-Spring Terminal Blocks
PI-Spring technology provides a Smart Connection and the benefits of 2 technologies in 1 connection:
1. 50% faster connection time with Push-In mode (direct insertion - for stranded wire with ferrule or for solid wire, use screwdriver to remove wire).
2. Reduced effort and conductor preparation time with Spring-Mode (use screwdriver to insert and remove non-prepared stranded wires).