Documentos Técnicos
Especificações
Brand
FTDI ChipNumber of Transceivers
1
Data Rate
3MBd
IC Type
Controller IC
Protocols Supported
USB 1.1, USB 2.0
Power Supply Type
Single
ESD protection
Yes
Typical Single Supply Voltage
5 V
Mounting Type
Surface Mount
Package Type
QFN
Pin Count
16
Dimensions
4 x 4 x 0.75mm
Height
0.75mm
Length
4mm
Maximum Operating Temperature
+85 °C
Width
4mm
Minimum Operating Temperature
-40 °C
País de Origem
Taiwan, Province Of China
Detalhes do produto
FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
10
P.O.A.
10
Documentos Técnicos
Especificações
Brand
FTDI ChipNumber of Transceivers
1
Data Rate
3MBd
IC Type
Controller IC
Protocols Supported
USB 1.1, USB 2.0
Power Supply Type
Single
ESD protection
Yes
Typical Single Supply Voltage
5 V
Mounting Type
Surface Mount
Package Type
QFN
Pin Count
16
Dimensions
4 x 4 x 0.75mm
Height
0.75mm
Length
4mm
Maximum Operating Temperature
+85 °C
Width
4mm
Minimum Operating Temperature
-40 °C
País de Origem
Taiwan, Province Of China
Detalhes do produto
FT230X, FT231X, FT234XD - Full Speed USB to UART, FTDI Chip
The FTDI Chip FT230X and FT234XD are Ful Speed USB to basic serial UART interface devices. The FT231X is a Full Speed USB to Full Handshake UART interface.
They have a fully integrated MTP memory and an integrated clock circuit which requires no external crystal which helps to reduce external component count.
Capable of operating up to 3 MBaud, with low power consumption (8 mA), all USB to UART devices operate efficiently with USB host controllers. They use as little bandwidth as possible.
The FT230X includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over a UART interface.