Documentos Técnicos
Especificações
Brand
ITT CannonNumber Of Contacts
15
Mounting Type
Panel Mount
Connector Size
Standard
Plug/Socket
Socket
Contact Gender
Female
Termination Method
Crimp
IP Rating
IP67
Body Orientation
Straight
Series
Trident Neptune
Contact Plating
Nickel
Maximum Operating Temperature
+105°C
Contact Material
Copper
Minimum Operating Temperature
-55°C
País de Origem
Hungary
Detalhes do produto
Panel Plug and Socket Shells, Jam Nut Fixing
Mounted from the rear of a panel via a single "D" hole. May also be used for in-line connections. Includes "O" ring interface seals, rubber cable seals, seal securing nuts and plastic jam nut.Can be used for in-line connections.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 483,90
Each (Sem VAT)
1
R$ 483,90
Each (Sem VAT)
1
Comprar em grandes quantidades
Quantidade | Preço unitário |
---|---|
1 - 19 | R$ 483,90 |
20 - 39 | R$ 442,72 |
40+ | R$ 404,94 |
Documentos Técnicos
Especificações
Brand
ITT CannonNumber Of Contacts
15
Mounting Type
Panel Mount
Connector Size
Standard
Plug/Socket
Socket
Contact Gender
Female
Termination Method
Crimp
IP Rating
IP67
Body Orientation
Straight
Series
Trident Neptune
Contact Plating
Nickel
Maximum Operating Temperature
+105°C
Contact Material
Copper
Minimum Operating Temperature
-55°C
País de Origem
Hungary
Detalhes do produto
Panel Plug and Socket Shells, Jam Nut Fixing
Mounted from the rear of a panel via a single "D" hole. May also be used for in-line connections. Includes "O" ring interface seals, rubber cable seals, seal securing nuts and plastic jam nut.Can be used for in-line connections.
Neptune
Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.