Megger 1007-157 Insulation Tester Probe, For Use With MIT480

Nº de Estoque RS: 611-1308Marca: MeggerPart Number: 1007-157
brand-logo
Ver tudo em Acessórios de Verificação de Isolamento

Documentos Técnicos

Especificações

Brand

Megger

Accessory Type

Probe

For Use With

MIT480

País de Origem

United Kingdom

Detalhes do produto

MIT480 Series Telecom Insulation & continuity test

Telecommunication insulation and continuity testers developed to meet the special requirements of telephone line testing, as well as the requirements of electrical contractors and industrial testing to CATIV 600V. All instruments meet TNV3 as well as IEC1010, HD384 and BSEN61557. The insulation test inhibit voltage has been raised to 75V to overcome interference between cables experienced at lower voltages, compared to 50V for standard cable testing.

Supplied with

Hard carry case, rubber boot with stand, silicone test lead set, SP5 remote switch probe, 5 off AA alkaline batteries & instructions (CD-ROM).

Você pode estar interessado em

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 2.199,64

Each (Sem VAT)

Megger 1007-157 Insulation Tester Probe, For Use With MIT480

1

Disponível em múltiplos de 1
1R$ 2.199,64
2R$ 4.399,28
3R$ 6.598,92
4R$ 8.798,56
5R$ 10.998,20
6R$ 13.197,84
7R$ 15.397,48
8R$ 17.597,12
9R$ 19.796,76
10R$ 21.996,40
11R$ 24.196,04
12R$ 26.395,68
13R$ 28.595,32
14R$ 30.794,96
15R$ 32.994,60

R$ 2.199,64

Each (Sem VAT)

Megger 1007-157 Insulation Tester Probe, For Use With MIT480
Informações de estoque temporariamente indisponíveis.

1

Disponível em múltiplos de 1
1R$ 2.199,64
2R$ 4.399,28
3R$ 6.598,92
4R$ 8.798,56
5R$ 10.998,20
6R$ 13.197,84
7R$ 15.397,48
8R$ 17.597,12
9R$ 19.796,76
10R$ 21.996,40
11R$ 24.196,04
12R$ 26.395,68
13R$ 28.595,32
14R$ 30.794,96
15R$ 32.994,60
Você pode estar interessado em

Documentos Técnicos

Especificações

Brand

Megger

Accessory Type

Probe

For Use With

MIT480

País de Origem

United Kingdom

Detalhes do produto

MIT480 Series Telecom Insulation & continuity test

Telecommunication insulation and continuity testers developed to meet the special requirements of telephone line testing, as well as the requirements of electrical contractors and industrial testing to CATIV 600V. All instruments meet TNV3 as well as IEC1010, HD384 and BSEN61557. The insulation test inhibit voltage has been raised to 75V to overcome interference between cables experienced at lower voltages, compared to 50V for standard cable testing.

Supplied with

Hard carry case, rubber boot with stand, silicone test lead set, SP5 remote switch probe, 5 off AA alkaline batteries & instructions (CD-ROM).

Você pode estar interessado em