Molex Premise Networks Cable Tester STP, UTP, SLT3S
Documentos Técnicos
Especificações
Equipment Type
Cable Tester
Connector Type
STP, UTP
Power Source
Battery
Battery Type
9V
Dimensions
146 x 58 x 38mm
Weight
284g
Display Type
LED
Height
144mm
Width
60mm
Model Number p
SLT3S
Model Number (p)
SLT3S
País de Origem
United States
Detalhes do produto
Molex UTP and STP Cable Tester
From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 2.547,72
Each (Sem VAT)
1
R$ 2.547,72
Each (Sem VAT)
1
Documentos Técnicos
Especificações
Equipment Type
Cable Tester
Connector Type
STP, UTP
Power Source
Battery
Battery Type
9V
Dimensions
146 x 58 x 38mm
Weight
284g
Display Type
LED
Height
144mm
Width
60mm
Model Number p
SLT3S
Model Number (p)
SLT3S
País de Origem
United States
Detalhes do produto
Molex UTP and STP Cable Tester
From Molex the 33A-100-10 data wiring tester, designed to check the integrity of 2, 3 and 4 pair UTP and STP channels. With a unique 3-in-1 design the sturdy tester features built-in modular jack connectors for USOC, 568A and 568B wiring sequences.
The robust multi-function cable tester comprises of two handheld parts, the master unit and the remote unit. This provides a convenient method for end-to-end testing of pre-installed cabling. By connecting the master and the slave unit to each end of the cable the tester automatically verifies the correct wiring sequence. A continuously sequencing LED display gives a clear visual indication of any shorts opens, reversals and mis-wire within the wiring system
Powered by a 9-volt alkaline battery this portable tester is an essential piece of test equipment for any design, installation or test engineer’s toolbox