Norgren Pneumatic Regulator -, 20bar max. input

Nº de Estoque RS: 267-9614Marca: NorgrenPart Number: R68G-NNK-RLN
brand-logo
Ver tudo em Reguladores Pneumáticos

Documentos Técnicos

Especificações

Brand

Norgren

Maximum Input Pressure

20bar

Manufacturer Series

R68G

Pressure Gauge Port Size

Rc 1/8

Pressure Gauge Port Thread Size

1/8in

Typical Flow Rate

10200L/min

Integral Check Valve

Without Check Valve

Port Connection Thread Standard

G

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

+80°C

Pressure Gauge Port Thread Standard

Rc

País de Origem

Czech Republic

Detalhes do produto

Regulator

Regulator, Filter/Regulator

These high capacity units, with large valve and diaphragm, have excellent flow and regulation characteristics. The redesigned, upgraded products are fully interchangeable with existing Olympian® 15 series units. Each fits into a G 3/4 or G1 ported yoke assembly, ordered separately. In each case the body, bonnet and valve are in aluminium, the push-to-lock adjusting knob is in acetal resin and elastomers are synthetic rubber. Supplied with ’O’ rings (1in/1out).

Você pode estar interessado em

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

R$ 4.765,57

Each (Sem VAT)

Norgren Pneumatic Regulator -, 20bar max. input

R$ 4.765,57

Each (Sem VAT)

Norgren Pneumatic Regulator -, 20bar max. input
Informações de estoque temporariamente indisponíveis.

Comprar em grandes quantidades

QuantidadePreço unitário
1 - 4R$ 4.765,57
5 - 9R$ 4.688,93
10+R$ 4.607,47
Você pode estar interessado em

Documentos Técnicos

Especificações

Brand

Norgren

Maximum Input Pressure

20bar

Manufacturer Series

R68G

Pressure Gauge Port Size

Rc 1/8

Pressure Gauge Port Thread Size

1/8in

Typical Flow Rate

10200L/min

Integral Check Valve

Without Check Valve

Port Connection Thread Standard

G

Minimum Operating Temperature

-20°C

Maximum Operating Temperature

+80°C

Pressure Gauge Port Thread Standard

Rc

País de Origem

Czech Republic

Detalhes do produto

Regulator

Regulator, Filter/Regulator

These high capacity units, with large valve and diaphragm, have excellent flow and regulation characteristics. The redesigned, upgraded products are fully interchangeable with existing Olympian® 15 series units. Each fits into a G 3/4 or G1 ported yoke assembly, ordered separately. In each case the body, bonnet and valve are in aluminium, the push-to-lock adjusting knob is in acetal resin and elastomers are synthetic rubber. Supplied with ’O’ rings (1in/1out).

Você pode estar interessado em