Rohde & Schwarz Bench Power Supply, 0 → 30V, 3A, 3-Output, 100W

Nº de Estoque RS: 144-8221Marca: Rohde & SchwarzPart Number: NGE103IMPA: 0
brand-logo

Documentos Técnicos

Especificações

Maximum Temperature

+40°C

Number of Displays

3

Minimum Temperature

0°C

Number of Outputs

3

Input Connector

4 mm Connector

Type

Digital

Output Connector

4 mm Safety Socket

Power Rating

100W

Supply Voltage

115 → 230V ac

Output Current

3A

Output Voltage

0 → 30V

País de Origem

Malaysia

Detalhes do produto

Combined Surge & Noise Protection

This unit will filter out surges, spikes, noise harmonics and radio frequency interference (RFI) from the 230Vac mains supply.

Transient Voltage Suppressors (Mains, Domestic)

Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. For protecting mains power systems, categories A, B and C (mains) devices are used. All mains style products in this section are location category B and exceed the requirements of location category A making them suitable for use in both locations.

Informações de estoque temporariamente indisponíveis.

Verifique novamente mais tarde.

Informações de estoque temporariamente indisponíveis.

P.O.A.

Rohde & Schwarz Bench Power Supply, 0 → 30V, 3A, 3-Output, 100W

P.O.A.

Rohde & Schwarz Bench Power Supply, 0 → 30V, 3A, 3-Output, 100W
Informações de estoque temporariamente indisponíveis.

Documentos Técnicos

Especificações

Maximum Temperature

+40°C

Number of Displays

3

Minimum Temperature

0°C

Number of Outputs

3

Input Connector

4 mm Connector

Type

Digital

Output Connector

4 mm Safety Socket

Power Rating

100W

Supply Voltage

115 → 230V ac

Output Current

3A

Output Voltage

0 → 30V

País de Origem

Malaysia

Detalhes do produto

Combined Surge & Noise Protection

This unit will filter out surges, spikes, noise harmonics and radio frequency interference (RFI) from the 230Vac mains supply.

Transient Voltage Suppressors (Mains, Domestic)

Voltage surges, often referred to as spikes or transient overvoltages are typically caused by switching of fluorescent lights, fuses blowing or nearby lightning activity. For protecting mains power systems, categories A, B and C (mains) devices are used. All mains style products in this section are location category B and exceed the requirements of location category A making them suitable for use in both locations.