Documentos Técnicos
Especificações
Brand
SMCConnector B
Push In 6 mm
Pneumatic Fitting Type
Bulkhead Threaded-to-Tube Adaptor
Connection Style
Threaded-to-Tube
Manufacturer Series
KQ2
Thread Material
Nickel Plated Brass
Body Material
Nickel Plated Brass
Minimum Operating Temperature
-5 °C, 0°C
Maximum Operating Temperature
+40 °C, +60°C
Finish
Nickel Plated
Maximum Operating Pressure
1 MPa, 3 MPa
Mounting Hole Diameter
15mm
Connector A
Push In 6 mm
Tube Connection A - Type
Push In
País de Origem
Japan
Detalhes do produto
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.
Bulkhead Adapators
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 110,21
Each (In a Pack of 10) (Sem VAT)
10
R$ 110,21
Each (In a Pack of 10) (Sem VAT)
10
Comprar em grandes quantidades
Quantidade | Preço unitário | Per Pacote |
---|---|---|
10 - 40 | R$ 110,21 | R$ 1.102,10 |
50 - 90 | R$ 107,44 | R$ 1.074,40 |
100+ | R$ 104,50 | R$ 1.045,00 |
Documentos Técnicos
Especificações
Brand
SMCConnector B
Push In 6 mm
Pneumatic Fitting Type
Bulkhead Threaded-to-Tube Adaptor
Connection Style
Threaded-to-Tube
Manufacturer Series
KQ2
Thread Material
Nickel Plated Brass
Body Material
Nickel Plated Brass
Minimum Operating Temperature
-5 °C, 0°C
Maximum Operating Temperature
+40 °C, +60°C
Finish
Nickel Plated
Maximum Operating Pressure
1 MPa, 3 MPa
Mounting Hole Diameter
15mm
Connector A
Push In 6 mm
Tube Connection A - Type
Push In
País de Origem
Japan
Detalhes do produto
Bulkhead Union KQ2E
The KQ2E one-touch bulkhead unions are used to connect tubes through a panel and are suitable for use with nylon and polyurethane tubes. The special profile design of these bulkhead unions provide positive sealing under pressure without reducing the flow. When the connector is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.