Wurth Elektronik, WR-DC Right Angle DC Socket Rated At 5.0A, 18.0 V, PCB Mount, length 8.0mm, Gold, Tin
Documentos Técnicos
Especificações
Brand
Wurth ElektronikDC Power Connector Type
DC Socket
Current Rating
5.0A
Body Orientation
Right Angle
Voltage Rating
18.0 V
Length
8.0mm
Width
9.0mm
Mounting Type
PCB Mount
Pin Diameter
2.1mm
Contact Plating
Gold, Tin
Contact Material
Copper Alloy
Series
WR-DC
Detalhes do produto
Wurth WR-DC SMT Mount Low Profile DC Power Jacks - 3.9 mm Barrel Diameter
PCB SMT mount DC power jacks or barrel connectors with a low profile design and a 3.9mm barrel diameter. These right angle SMT mount DC power jacks have an internal normally closed single switch and internal pin diameters of 1.05 mm and 1.35mm. The stamped contacts of these DC power jacks are gold plated and the housings are made from black UL94-V0 PA9T. Board guides are incorporated into the bottom of the housing to aid positioning on the PCB along with four soldering pads.
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
R$ 33,41
Each (In a Pack of 5) (Sem VAT)
5
R$ 33,41
Each (In a Pack of 5) (Sem VAT)
5
Comprar em grandes quantidades
| Quantidade | Preço unitário | Per Pacote |
|---|---|---|
| 5 - 5 | R$ 33,41 | R$ 167,05 |
| 10 - 45 | R$ 32,16 | R$ 160,80 |
| 50 - 95 | R$ 31,00 | R$ 155,00 |
| 100+ | R$ 29,68 | R$ 148,40 |
Documentos Técnicos
Especificações
Brand
Wurth ElektronikDC Power Connector Type
DC Socket
Current Rating
5.0A
Body Orientation
Right Angle
Voltage Rating
18.0 V
Length
8.0mm
Width
9.0mm
Mounting Type
PCB Mount
Pin Diameter
2.1mm
Contact Plating
Gold, Tin
Contact Material
Copper Alloy
Series
WR-DC
Detalhes do produto
Wurth WR-DC SMT Mount Low Profile DC Power Jacks - 3.9 mm Barrel Diameter
PCB SMT mount DC power jacks or barrel connectors with a low profile design and a 3.9mm barrel diameter. These right angle SMT mount DC power jacks have an internal normally closed single switch and internal pin diameters of 1.05 mm and 1.35mm. The stamped contacts of these DC power jacks are gold plated and the housings are made from black UL94-V0 PA9T. Board guides are incorporated into the bottom of the housing to aid positioning on the PCB along with four soldering pads.