Documentos Técnicos
Especificações
Brand
DigilentAccessory Type
Programming Module
Product Type
Development Kit Accessory
For Use With
FPGA Devices
Standards/Approvals
No
Detalhes do produto
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
Informações de estoque temporariamente indisponíveis.
R$ 974,80
R$ 974,80 Each (Sem VAT)
1
R$ 974,80
R$ 974,80 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 4 | R$ 974,80 |
| 5 - 9 | R$ 940,28 |
| 10+ | R$ 924,20 |
Documentos Técnicos
Especificações
Brand
DigilentAccessory Type
Programming Module
Product Type
Development Kit Accessory
For Use With
FPGA Devices
Standards/Approvals
No
Detalhes do produto
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
