Documentos Técnicos
Especificações
Brand
ParkerProduct Type
Pneumatic Timer
Hazardous Area Certification
NFC 23514, NFC 23519, LCIE 866115X, EN 50019, EExe ll T4, EN 50014
Mount Type
Flush, DIN Rail, Surface
Minimum Operating Pressure
3bar
Maximum Operating Pressure
8 bar
Minimum Operating Temperature
-15°C
Maximum Operating Temperature
60°C
Standards/Approvals
NFC 23519, EN 50014, EN 50019, NFC 23514
Detalhes do produto
The Parker PRT series pneumatic time delay relay requires operating pressure ranging between 3bar and 8bar. This ON delay timer has a timing range from 10 seconds to 180 seconds. This timer has maintained input signal during an adjustable time after which a regenerated output appears. It is consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Note:
All the logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing O-rings are in the bottom of each unit.
Informações de estoque temporariamente indisponíveis.
R$ 5.117,10
R$ 5.117,10 Each (Sem VAT)
1
R$ 5.117,10
R$ 5.117,10 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 4 | R$ 5.117,10 |
| 5+ | R$ 4.987,87 |
Documentos Técnicos
Especificações
Brand
ParkerProduct Type
Pneumatic Timer
Hazardous Area Certification
NFC 23514, NFC 23519, LCIE 866115X, EN 50019, EExe ll T4, EN 50014
Mount Type
Flush, DIN Rail, Surface
Minimum Operating Pressure
3bar
Maximum Operating Pressure
8 bar
Minimum Operating Temperature
-15°C
Maximum Operating Temperature
60°C
Standards/Approvals
NFC 23519, EN 50014, EN 50019, NFC 23514
Detalhes do produto
The Parker PRT series pneumatic time delay relay requires operating pressure ranging between 3bar and 8bar. This ON delay timer has a timing range from 10 seconds to 180 seconds. This timer has maintained input signal during an adjustable time after which a regenerated output appears. It is consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Note:
All the logic units require mounting on a separate 2 or 3 port base, available separately. Logic units have an input (green) and output (red) pressure indicator to show the state of the respective signal. Units are supplied with two captive screws for mounting on all types of base and sealing O-rings are in the bottom of each unit.
