Documentos Técnicos
Especificações
Brand
Renesas ElectronicsProduct Type
Clock Buffer
Maximum Input Frequency
133MHz
Maximum Propagation Delay Time
250ps
Mount Type
Surface
Package Type
SOIC
Pin Count
8
Minimum Supply Voltage
3V
Maximum Supply Voltage
3.6V
Minimum Operating Temperature
0°C
Maximum Operating Temperature
70°C
Length
5mm
Height
1.75mm
Standards/Approvals
No
Series
2305-1DCG
Automotive Standard
No
Detalhes do produto
The Renesas Electronics 2305 is a low phase noise, high-speed PLL based, low-skew zero delay buffer. Based on IDT's proprietary low jitter Phase Locked Loop (PLL) techniques, the device provides four low skew outputs at speeds up to 133 MHz at 3.3 V. The outputs can be generated from the PLL (for zero delay), or directly from the input (for testing), and can be set to tri-state mode or to stop at a low level. The PLL feedback is on-chip and is obtained from the CLKOUT pad. The 2305 is available in two different versions. The 2305-1 is the base part. The 2305-1H is a high drive version with faster rise and fall times.
Informações de estoque temporariamente indisponíveis.
R$ 1.553,94
R$ 16,02 Each (In a Tube of 97) (Sem VAT)
97
R$ 1.553,94
R$ 16,02 Each (In a Tube of 97) (Sem VAT)
Informações de estoque temporariamente indisponíveis.
97
| Quantidade | Preço unitário | Per Tubo |
|---|---|---|
| 97 - 97 | R$ 16,02 | R$ 1.553,94 |
| 194 - 485 | R$ 14,68 | R$ 1.423,96 |
| 582 - 970 | R$ 14,52 | R$ 1.408,44 |
| 1067 - 2425 | R$ 14,38 | R$ 1.394,86 |
| 2522+ | R$ 14,22 | R$ 1.379,34 |
Documentos Técnicos
Especificações
Brand
Renesas ElectronicsProduct Type
Clock Buffer
Maximum Input Frequency
133MHz
Maximum Propagation Delay Time
250ps
Mount Type
Surface
Package Type
SOIC
Pin Count
8
Minimum Supply Voltage
3V
Maximum Supply Voltage
3.6V
Minimum Operating Temperature
0°C
Maximum Operating Temperature
70°C
Length
5mm
Height
1.75mm
Standards/Approvals
No
Series
2305-1DCG
Automotive Standard
No
Detalhes do produto
The Renesas Electronics 2305 is a low phase noise, high-speed PLL based, low-skew zero delay buffer. Based on IDT's proprietary low jitter Phase Locked Loop (PLL) techniques, the device provides four low skew outputs at speeds up to 133 MHz at 3.3 V. The outputs can be generated from the PLL (for zero delay), or directly from the input (for testing), and can be set to tri-state mode or to stop at a low level. The PLL feedback is on-chip and is obtained from the CLKOUT pad. The 2305 is available in two different versions. The 2305-1 is the base part. The 2305-1H is a high drive version with faster rise and fall times.