Documentos Técnicos
Especificações
Brand
Raspberry PiType
Camera Module
Number of Channels
1
Supported Bus Interfaces
CSI-2
Maximum Supported Resolution
3280 x 2464 pixels
Maximum Frame Rate Capture
30fps
Dimensions
23.86 x 25 x 9mm
Height
9mm
Length
23.86mm
Maximum Operating Temperature
+60 °C
Minimum Operating Temperature
-20 °C
Width
25mm
País de Origem
United Kingdom
Detalhes do produto
The Raspberry Pi Bulk board camera module is single channel, 8 megapixels and supports CSI-2 bus interface. It has a maximum frame rate capture of 30fps. This high definition (HD) camera board connects to any Raspberry Pi or compute module, allowing you to create HD videos and still photographs. It utilises the IMX219PQ image sensor from Sony, which offers high-speed video imaging and high sensitivity. It also offers reduced image contamination such as fixed pattern noise and smearing. To connect the camera module to pi, a 15cm ribbon cable is attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, we can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs.
Informações de estoque temporariamente indisponíveis.
P.O.A.
Each (In a Box of 150) (Sem VAT)
150
P.O.A.
Each (In a Box of 150) (Sem VAT)
Informações de estoque temporariamente indisponíveis.
150
Documentos Técnicos
Especificações
Brand
Raspberry PiType
Camera Module
Number of Channels
1
Supported Bus Interfaces
CSI-2
Maximum Supported Resolution
3280 x 2464 pixels
Maximum Frame Rate Capture
30fps
Dimensions
23.86 x 25 x 9mm
Height
9mm
Length
23.86mm
Maximum Operating Temperature
+60 °C
Minimum Operating Temperature
-20 °C
Width
25mm
País de Origem
United Kingdom
Detalhes do produto
The Raspberry Pi Bulk board camera module is single channel, 8 megapixels and supports CSI-2 bus interface. It has a maximum frame rate capture of 30fps. This high definition (HD) camera board connects to any Raspberry Pi or compute module, allowing you to create HD videos and still photographs. It utilises the IMX219PQ image sensor from Sony, which offers high-speed video imaging and high sensitivity. It also offers reduced image contamination such as fixed pattern noise and smearing. To connect the camera module to pi, a 15cm ribbon cable is attached to the module slots straight into your Pi Camera Serial Interface port (CSI). Once connected, we can access the camera board via the Multi-Media Abstraction Layer (MMAL) or the Video for Linux (V4L) APIs.
