DIABLO16, Graphics Controller 64-Pin TQFP
Documentos Técnicos
Especificações
Brand
4D SystemsMounting Type
Surface Mount
Package Type
TQFP
Pin Count
64
Dimensions
10 x 10 x 1.05mm
Height
1.05mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+80 °C
Length
10mm
Width
10mm
País de Origem
Philippines
Detalhes do produto
DIABLO16 Graphics Controller for LCD and OLED Displays, 4D Systems
The DIABLO16 embedded graphics controller from 4D Systems, can be integrated into a variety of LCD and OLED displays. The controller uses the 4DGL graphics language supported by Extensive Virtual Engine (EVE) — a virtual processor with a comprehensive byte-code instruction set. You can also benefit from Workshop 4 IDE — a great development support software for all 4D processors and modules. The software has four development environments — Designer, Serial, ViSi and ViSi Genie.
Recommended applications for the DIABLO16 include, but are not limited to, home appliances, electronic gauges & meters, test & mesurement, general purpose instrumentation, GPS navigation systems, automotive system displays, medical instruments, security systems, gaming, aviation and HMI touch panels.
Features & Benefits of the DIABLO16 Graphics Controller
•6 banks of 32750 bytes of flash memory
•32 KB of SRAM
•16 I/O pins
•FAT16 files
•12C & SPI serial communications interface
•PWM output that supports audio WAV files
•4-Wire resistive touch panel interface
•8 x 16-bit timers
•Can operate as a standalone graphics controller
•Can connect to any LCD or OLED that supports an 80-series, 16-bit wide CPU interface
4D Systems Graphics Controllers
Informações de estoque temporariamente indisponíveis.
Verifique novamente mais tarde.
P.O.A.
1
P.O.A.
1
Documentos Técnicos
Especificações
Brand
4D SystemsMounting Type
Surface Mount
Package Type
TQFP
Pin Count
64
Dimensions
10 x 10 x 1.05mm
Height
1.05mm
Minimum Operating Temperature
-40 °C
Maximum Operating Temperature
+80 °C
Length
10mm
Width
10mm
País de Origem
Philippines
Detalhes do produto
DIABLO16 Graphics Controller for LCD and OLED Displays, 4D Systems
The DIABLO16 embedded graphics controller from 4D Systems, can be integrated into a variety of LCD and OLED displays. The controller uses the 4DGL graphics language supported by Extensive Virtual Engine (EVE) — a virtual processor with a comprehensive byte-code instruction set. You can also benefit from Workshop 4 IDE — a great development support software for all 4D processors and modules. The software has four development environments — Designer, Serial, ViSi and ViSi Genie.
Recommended applications for the DIABLO16 include, but are not limited to, home appliances, electronic gauges & meters, test & mesurement, general purpose instrumentation, GPS navigation systems, automotive system displays, medical instruments, security systems, gaming, aviation and HMI touch panels.
Features & Benefits of the DIABLO16 Graphics Controller
•6 banks of 32750 bytes of flash memory
•32 KB of SRAM
•16 I/O pins
•FAT16 files
•12C & SPI serial communications interface
•PWM output that supports audio WAV files
•4-Wire resistive touch panel interface
•8 x 16-bit timers
•Can operate as a standalone graphics controller
•Can connect to any LCD or OLED that supports an 80-series, 16-bit wide CPU interface