Documentos Técnicos
Especificações
Brand
CRCProduct Type
Conformal Coating
Colour
Red
Application
Tool, Electric Motor Winding, Solenoid, Armature Coil, Transformer Connector, Bus Bars, Terminal, Control, Box, Commutator End
Product Form
Liquid
Maximum Operating Temperature
120°C
Package Type
Aerosol
Base Material
Urethane
Dielectric Strength
40kV/mm
Package Size
250 ml
Minimum Operating Temperature
-40°C
Standards/Approvals
No
País de Origem
Belgium
Detalhes do produto
This CRC Urethane Coat provides a clear or red, one-component urethane coating that dries quickly, forming a durable, flexible, and non-conductive film. With a high dielectric strength of over 40 kV/mm and excellent volume resistivity exceeding 10^12 Ωcm, it enhances insulation and moisture protection for electrical components in temperatures ranging from -40°C to +120°C.
Approximately 120 minutes for a dry-to-touch finish.
Yes, it can be removed with specific cleaning agents if needed.
Informações de estoque temporariamente indisponíveis.
R$ 301,36
R$ 301,36 Each (Sem VAT)
1
R$ 301,36
R$ 301,36 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 5 | R$ 301,36 |
| 6 - 14 | R$ 293,36 |
| 15+ | R$ 291,54 |
Documentos Técnicos
Especificações
Brand
CRCProduct Type
Conformal Coating
Colour
Red
Application
Tool, Electric Motor Winding, Solenoid, Armature Coil, Transformer Connector, Bus Bars, Terminal, Control, Box, Commutator End
Product Form
Liquid
Maximum Operating Temperature
120°C
Package Type
Aerosol
Base Material
Urethane
Dielectric Strength
40kV/mm
Package Size
250 ml
Minimum Operating Temperature
-40°C
Standards/Approvals
No
País de Origem
Belgium
Detalhes do produto
This CRC Urethane Coat provides a clear or red, one-component urethane coating that dries quickly, forming a durable, flexible, and non-conductive film. With a high dielectric strength of over 40 kV/mm and excellent volume resistivity exceeding 10^12 Ωcm, it enhances insulation and moisture protection for electrical components in temperatures ranging from -40°C to +120°C.
Approximately 120 minutes for a dry-to-touch finish.
Yes, it can be removed with specific cleaning agents if needed.
