Documentos Técnicos
Especificações
Brand
Eccel Technology LtdProduct Type
RFID Reader
Sub Type
RF Module
Component Type
Reader
Maximum RF Data Rate
921600bps
Frequency
13.56MHz
Mount Type
Panel
Interface Type
UART
Minimum Supply Voltage
2.5V
Maximum Supply Voltage
3.6V
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
85°C
Length
50mm
Standards/Approvals
RoHS
Series
UART-B1
País de Origem
United Kingdom
Detalhes do produto
The UART-B1 is a low cost full RFID/NFC read/write device with UART interface. Can operate in host connected mode or stand alone mode. Supports Mifare Classic 1k & 4k, NTAG2xx and Ultralight. Additionally, you can read serial numbers from Mifare Plus, Mifare DESfire and any transponder compatible with the ISO14443A standard. The UART-B1 is based on our RFID-B1 module but is equipped with an additional integral antenna, an LED for tag in the field indication/ interrupt, mounting holes and flexible plated connection holes.The UART-B1 is an ideal choice if the user wishes to add RFID capability to their design quickly and easily.
Informações de estoque temporariamente indisponíveis.
R$ 1.148,34
R$ 1.148,34 Each (Sem VAT)
1
R$ 1.148,34
R$ 1.148,34 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
Documentos Técnicos
Especificações
Brand
Eccel Technology LtdProduct Type
RFID Reader
Sub Type
RF Module
Component Type
Reader
Maximum RF Data Rate
921600bps
Frequency
13.56MHz
Mount Type
Panel
Interface Type
UART
Minimum Supply Voltage
2.5V
Maximum Supply Voltage
3.6V
Minimum Operating Temperature
-25°C
Maximum Operating Temperature
85°C
Length
50mm
Standards/Approvals
RoHS
Series
UART-B1
País de Origem
United Kingdom
Detalhes do produto
The UART-B1 is a low cost full RFID/NFC read/write device with UART interface. Can operate in host connected mode or stand alone mode. Supports Mifare Classic 1k & 4k, NTAG2xx and Ultralight. Additionally, you can read serial numbers from Mifare Plus, Mifare DESfire and any transponder compatible with the ISO14443A standard. The UART-B1 is based on our RFID-B1 module but is equipped with an additional integral antenna, an LED for tag in the field indication/ interrupt, mounting holes and flexible plated connection holes.The UART-B1 is an ideal choice if the user wishes to add RFID capability to their design quickly and easily.
