Documentos Técnicos
Especificações
Brand
EzurioProduct Type
Bluetooth Module
Bluetooth Class
Class 2
Bluetooth Version
5.0
Data Rate
1Mbps
Maximum Output Power
5dBm
Receiver Sensitivity
-96dBm
Frequency
2.48GHz
Interface Type
UART, IIC, SPI, ADC, JTAG, PWM, GPIO
Minimum Supply Voltage
1.8V
Maximum Supply Voltage
3.8V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Height
2.3mm
Length
11.6mm
Standards/Approvals
EU, ISED, UKCA, RoHS, FCC, REACH, AS/NZS, MIC
Width
17.9mm
Series
450
País de Origem
Taiwan, Province Of China
Detalhes do produto
THE LAIRD CONNECTIVITY SaBLE-x-R2 is a certified Bluetooth low energy module built to deliver unmatched RF and power performance. The SaBLE-x-R2 builds on the field-proven hardware of the SaBLE-x to provide a simple, easy upgrade path for Bluetooth 5 connectivity. Built to remove complexity and accelerate development time, the module is pin-to-pin compatible with the original SaBLE-x hardware, which means upgrading to R2 does not require any PCB, footprint, or hardware changes in any existing SaBLE-x board layout.
Informações de estoque temporariamente indisponíveis.
P.O.A.
Padrão
1
P.O.A.
Informações de estoque temporariamente indisponíveis.
Padrão
1
Documentos Técnicos
Especificações
Brand
EzurioProduct Type
Bluetooth Module
Bluetooth Class
Class 2
Bluetooth Version
5.0
Data Rate
1Mbps
Maximum Output Power
5dBm
Receiver Sensitivity
-96dBm
Frequency
2.48GHz
Interface Type
UART, IIC, SPI, ADC, JTAG, PWM, GPIO
Minimum Supply Voltage
1.8V
Maximum Supply Voltage
3.8V
Minimum Operating Temperature
-40°C
Maximum Operating Temperature
85°C
Height
2.3mm
Length
11.6mm
Standards/Approvals
EU, ISED, UKCA, RoHS, FCC, REACH, AS/NZS, MIC
Width
17.9mm
Series
450
País de Origem
Taiwan, Province Of China
Detalhes do produto
THE LAIRD CONNECTIVITY SaBLE-x-R2 is a certified Bluetooth low energy module built to deliver unmatched RF and power performance. The SaBLE-x-R2 builds on the field-proven hardware of the SaBLE-x to provide a simple, easy upgrade path for Bluetooth 5 connectivity. Built to remove complexity and accelerate development time, the module is pin-to-pin compatible with the original SaBLE-x hardware, which means upgrading to R2 does not require any PCB, footprint, or hardware changes in any existing SaBLE-x board layout.
