Parker Pneumatic Timer 8 bar max
Documentos Técnicos
Especificações
Brand
ParkerProduct Type
Pneumatic Timer
Hazardous Area Certification
EN 50019 dated March 1977 (NFC 23519 dated May 1982), EExe ll T4, Conforming to certificate LCIE 866115X
Minimum Operating Pressure
3bar
Mount Type
Surface, Flush, DIN Rail, Clip
Maximum Operating Pressure
8 bar
Minimum Operating Temperature
-15°C
Maximum Operating Temperature
60°C
Standards/Approvals
EN 50019 dated March 1977 (NFC 23519 dated May 1982), EN 50014 dated March 1977 (NFC 23514 dated May 1982)
País de Origem
France
Detalhes do produto
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.
Informações de estoque temporariamente indisponíveis.
R$ 5.536,63
R$ 5.536,63 Each (Sem VAT)
1
R$ 5.536,63
R$ 5.536,63 Each (Sem VAT)
Informações de estoque temporariamente indisponíveis.
1
| Quantidade | Preço unitário |
|---|---|
| 1 - 4 | R$ 5.536,63 |
| 5+ | R$ 5.396,88 |
Documentos Técnicos
Especificações
Brand
ParkerProduct Type
Pneumatic Timer
Hazardous Area Certification
EN 50019 dated March 1977 (NFC 23519 dated May 1982), EExe ll T4, Conforming to certificate LCIE 866115X
Minimum Operating Pressure
3bar
Mount Type
Surface, Flush, DIN Rail, Clip
Maximum Operating Pressure
8 bar
Minimum Operating Temperature
-15°C
Maximum Operating Temperature
60°C
Standards/Approvals
EN 50019 dated March 1977 (NFC 23519 dated May 1982), EN 50014 dated March 1977 (NFC 23514 dated May 1982)
País de Origem
France
Detalhes do produto
Timer Module
A pneumatic timer consists of a solenoid coil/core, operating spring, timing disk, filter and diaphragm. The core moves up into the coil when it has been energized and this leads to pressure on the diaphragm. The diaphragm moves into the top chamber which un-traps the air through the timing disk. By altering the needle valve you can adjust the amount of delay.
Logic Systems
Logic units are best thought of as miniature valves, whose purpose is to influence the behaviour of larger power valves. They achieve this by producing and receiving output and input signals, using the common air supply. In this way, they are able to monitor and control a whole sequence of operations with great accuracy and repeatability.